Search results for query: *

Buy an omega compressor from Air Gun Of Arizona. Consumer service is exactly what you would want. My omega has been trouble free for 4 years. I shoot a lot, 10,000 pellets a year isn’t a uncommon occurrence. I use it to fuel a scuba tank, and I run a inline descent filter but it always stays...

If anyone has an unmodified or slightly modified Benjamin Discovery I am interested in buying one.

Pump guns and PCP’s have the exact same are delivery. It is high pressure air released by a valve. The only difference is how the high pressure air is achieved, one has a multiple shot tank of air, the other doesn’t. So them basically being the same platform how would that result in a PCP...

Any modern pump gun can shoot 50 yards. My .22 Seneca Dragonfly mark 2 makes 16 ftlbs with a Crosman premier pellets. It’s definitely minute of Soda can at that range

Easy, Benjamin Marauder gen 2 .25 cal. Mine loves JSB king Heavy but it’s only pushing 750 fps, however I can hit anything I aim it at from 10 to 100 yards. Obviously it’s not a bench rest champ but it can knock the hell out of tin cans, grapefruits, starlings. Basically it does whatever I...

I agree, this is one of the best platforms in an uncomplicated manner if there ever was one.

Thank you and that’s exactly what I was thinking. I got a tube of silicone grease and have greased all the orings I have replaced in the past but it never hurts to hear what others do. Thank you

Hello, I have a hill pump and it works good for what it is. People say they rebuild easy and I can tell you even though it’s a really good hand pump, it’s not very fun to use. I upgraded from the hill hand pump to a gx-cs3. And I can tell you that was a very nice upgrade. If you are not...

Hello all, I am pulling my .25 Marauder apart as it appears to have a broken popit valve. Anyway I am replacing all the o-rings while it is apart and was considering putting a thin coat of silicone grease on the o-rings. I also see a chap on this site selling regulator butter for regulator...

I also recommend a Marauder, very dependable, accurate, whisper quiet and a very good trigger. I have two of them one is .177 and it makes 20 ftlbs with 10.3 JSB pellets ( FYI I killed 3 starlings with it today) And a .25 that makes 45 ftlbs. Downside is it’s a full size rifle

I mainly regret selling stuff, I had a nice Brocock sniper, a HW77, and I had an old TX200 that was made before the fancy checkering that I wish I had back. Or even my first PCP a Benjamin Discovery in .22, that was a handy light and accurate gun really wish I had the discovery back.

Yes 15.89, I have the FX branded ones so they are labeled 16.

The breach on the 48 is very loose, the JSB is softer and the skirt is wider. However you will lose some velocity, JSB 16’s in my full power 48 make 19.8 FTLBS every thing else is over 20. However the 16’s are very accurate, I have shot a field target course with this setup. And no I did not...

Before you rip the gun apart again try a different pellet. My T06 .22 48 hates FTT pellets. You need to try JSB 16 grain pellets, I am willing to bet your groups will tighten right up,

.177 HW30 with a taco 2-7 scope. I have lots of springers and I avoided buying a HW30 for the longest time. But when it’s me and my 7 year old son sitting on the pick nick table, me with the HW30 and him with his PROD (set up as a carbine) and we are shooting apples off the tree at 20 yards...

Hello and good morning. I can understand your frustration with the price of the TX200 and it not being what you want. I would agree with everyone else that if your not happy you should send it back. That being said, I have owned 6 TX200’s, and the blueing has been good on some and not great on...

Nope, you set the compressor so that you back it off and the compressor holds the pressure, so as you unthread the cap you progressively back off the compressor. The end cap is never completely loose, and once the tension is off the spring you take the compressor off, there is no more...

Anyone out there shooting a .25 spring gun? I have always been interested in this combination. And for me the only game in town would be the HW80 or HW77. Please tell me your experience and thoughts, purpose of the rifle would be an open sighted hunting rifle. Also what pellets are good for this...

I had a similar experience with this, I watched too many videos of guys in Germany servicing their 5ftlb guns. I unthreaded the end cap of a HW77 and the dam thing about took my finger off. Spring compressor is a must,

That’s a great idea, and for some reason I never thought about it. PS I missed out on a silver streak you had on eBay if I remember correctly, sure wish I could have picked it up