Search results for query: *

Hi, don't you get annoyed by that rattle noise of the trigger? I took the trigger link part and dipped it in liquid rubber. When I reinstalled the part I put a little bit of grease on the side where it's touching the system and also on the ends at the screws to prevent from friction so that the...

Never trust an unseated pellet in a gk1:ROFLMAO:

I'm in contact with the Huben shop in Spain. I will ask about any changes.

Yes the new valve design makes it even weaker. Hopefully it'll last.

The power is back! ❤️ I removed the washer and it works now. It's making 89 ft lbs with 51 grain slugs. Thank you so much! Dave, you're a genius!

Interesting thought! I'm gonna try it...

The od the same on both. I can't measure the length because the other is broken into pieces. As already mentioned the new opening valve has four grooves on the bottom side (opposite from the sealing end). But I doubt that this has anything to do with the issue. But I had dry fired it a few...

So today the new closing valve arrived. Immediately went to test with disappointing results. The pistol is only putting out around 47 ft lbs. I've checked the springs and the shooting valve. All good. But there's a big change on that closing valve. It has different grooves that are most likely...

Have you opened your V3 up and looked for it? Well mine has it and so does Gregor Kamensek's. He displays all parts on the V3 model. Yes, the washer isn't documented. It's questionable why they put it in there. Also the washer's flat side has a rough stamped surface. Perhaps to have better...

It might be the print of the washer's edge. It's more like a Belleville washer. The cupped side facing the valve surface.

At least it should be an easy fix.

I had it on 350 at first. The issue started at around 300 bar. But it's rated to operate at that pressure. Also I never shot it at full power. Which version do you have? Because my V3 doesn't have a brass part in it. The pressure is adjusted by the grub screw of the trigger unit which pushes on...

Yeah that part should've been made out of some stronger material. For some important details on it I recommend checking out Gregor's disassemble video.

The springs are good. Maybe a rookie mistake. Here's my thought of why this happened. When you remove the trigger guard make sure that you only put it back on when the system is depressurized or screw the adjustment screw all the way out to prevent any force on the on the closing valve. Perhaps...

The closing valve broke into pieces...jeez

I've had adjusted mine to shoot .25 Hades at 40 joules. Fired a bunch this weekend when suddenly the gun sounded different and I felt a power loss. Now it's only putting out 10 joules no matter what. I've screwed the power adjuster all the way out and no change. The valve must be stuck. Anyone...

Thanks guys.

Did you have that issue before?

I've checked it and everything looks ok. After reassemble it was still the same. But there are no malfunctions or safety issues. It's been fired a lot. I must correct myself of how I described the play of the magazine. When it's locked it's not moving in CW direction only a little bit CCW.

Do you mean the mag release arm? Which part number?