Search results for query: *

If you know the rate of fill from your compressor you can set the inlet flow rate to match with a flowgauge style reg/flometer My GX CS4 has a 11 lpm fill rate which is about 21 cuft hr I have also a GX CS2 and feed it 8psi for field use on my truck.the feed line is 1/4" hose I have tried Helium...

Why not put a want to buy add in classified, lots of people have an old long tube from doing a conversion to bottle I'm in washington also, north of Seattle and have said long tube from my avenger :>) DM me

The main reason they only have a 15 year life cycle in the US is because of hydro testing CF tanks taking them to 7500 psi with water cracks some of the fibres and after three test's they start to fail. CF tanks should only be tested with Acoustic Wave machines.

Huben GK1 Krazkool airguns

Matheson and Airgas both have Nitrogen in your city

Yep stay with silicone and because you use N2 they seem to never dry out or crack must be NO oxidizers O2 CO2 and misc.

Both my GK1's in .177 and .22 have the same play

They must have meant per month or is that per week?

Downside to semi auto after shooting them and then going back to side lever or bolt and wishing all of them were semi auto

Airgas, air liquide, arc3 gases, all will have hydro test capabilities

Guts looking at that picture tells me that is not a carbon fibre tank I could be wrong the OP can clairify looks like an aluminum scuba tank

Why don't you get it hydro tested cost's about 30 bucks, What city are you in or near?

You must have lots of extra pivot pins

Yep

Here's my solution to water in compressors, Only feed your compressor Nitrogen no filters needed and no oxygen or Co2 look at my avatar pic

If you look up YT vids by Gregor K he recomends seating the pellets all the way for best accuracy I think Kelly at Krazcool agrees as he sent a pellet seating pen with my last gun purchase:):)

Yep and if they rattle in the mag a jam is moments away, I leave the loading gate open after loading and seating tip the gun up and rotate the cylinder if any fall out I remove them all and never use those pellets in the Huben K1 or GK1

If you want DRI air then feed your compressor nothing but pure Nitrogen, nothing else compares .

Ya I got that notice today also but at over 200 dollars they can keep em