Search results for query: hammer adjustment

...with 3 different optional hammer weights and 2 different hammer springs. When you add several different #2 regulator settings and hammer adjustments, IT"S A LOT of testing! And still I decided what .30 cal slug tune is best. For the 200 yard card splitting, I used the following tune. 76 grain...

Yeah, you need to adjust that hammer down way down

I tried to use the power wheel to make adjustments, but there aren’t changes.

Before you send it away for service/repair, there's three things you can do: 1. Check muzzle velocity. It should be around 135ms (~445fps) with 0,53g (8,2gr) pellets. If significantly lower than this (115ms or lower), the hammer spring might be worn and/or the regulator might need a...

You can have your power wheel set at 8 and the hammer will have the same tension behind it as 16 if the micro wheel is at 5. That micro wheel is really all that matters. With your hammer settings where you describe them, adjust the power wheel down and watch your micro tuner. It does not...

As far as I know it locks the knob on the opposite side of gun. I thought it was the hammer adjustment but I think it’s a transfer port adjustment

I haven't played with my regulator on either of my Taipans. For pellets I don't think there's any problem just using the hammer spring for pellets. On my Taipan tactical 2 700mm which I bought used. It had the stronger hammer spring installed and with the 700mm barrel. Just for more fps slugs...

Just a follow-up to finalize: I decided that a small mod to the stock would simplify tuning matters greatly, so I drilled a small access hole in the stock for adjustment. The standard long allen wrench works perfectly. Now no longer necessary to detatch the stock for adjustment of the hammer.

LD has come up with a new tune that cures the "farts". It involves using a shorter and stiffer hammer spring that allows for "free floating" the last 1/8" of the hammer swing. Now you get a quick "pop" and no double bouncing of the hammer on the firing valve pin. Depending on the stiffness of...

Is it just the silver thing?

And where is that other outer screw that adjust the hammer spring tension? Is that the one on the picture that needed to be removed in order to access the inner screw?

Don’t use the huma hammer spring -it’s too long - you loose all adjustability Matt

Hi all you Taipan Veteran owners, I am now the proud owner of one, full power. I have not actually used it yet for various reasons but that will change soon 😁. Do any of you use pellets and if so can the rifle be adjusted for pellets just by adjusting the hammer spring or do you have to mess...

Many PCPs have a way to adjust hammer spring tension on the fly. Doing so will change valve lift and dwell to be more suited to lighter or heavier pellets. I am not aware of any such on-the-fly adjustment for plenum volume. Granted, I can’t think of much good reason to have this feature since...

Firstly, on the warp models like mine that have the drop block regulator, the regulator is held on by the air pressure- at 0 pressure, the block is loose and wiggly. I think its designed like this so you can adjust the reg pressure using this adjustment screw on top . I am currently...

You can use the hammer adjuster to tweak your velocities as the temperature and humidity change. A worthwhile addition. The hammer adjuster on the later DRS's has a spring and ball detent that gives 15 positions (clicks) per complete revolution. That means about 0.067mm of hammer spring...

Decided to change my FX Royale 500 factory tune from the 25.39 grain to 33.95 grain JSB KING HEAVY pellets. I used a bit if heat to free the Lok-tite on the Hammer Spring adjuster nut and cleaned out the residue. Then I needed to make a M16x1 jam-nut to lock the Hammer Spring adjuster nut and a...

yes..... I was thinking on removing hammer spring, its harder to have good adjustment on macro and micro. give me lots more of fps but very hard for fine tune

Sounding like you need to start clipping spring coils as with the springs greater preload when contained within a SSG devise it is over driving hammer. SSG's don't offer broad tuning, but do offer very consistent & low ES shots when calibrated correctly. Reg Pressure, Hammer weight & stroke...

Edit for 700mm .25 reg1 - 150 reg2 - 95 hammer macro - 16 hammer micro - 2.5 valve adjuster knob - 4