Search results for query: hammer adjustment

Then obviously, my friend, you have the wrong gun. :cool:

No, the hammer is automatically (pneumatically) adjusted based on the reg pressure.

I am about to do the same to a M3 sniper .22. I am going to run the reg at 100bar put the dwell valve at 2 lines and hammer adjuster in the middle. Shoot for accuracy. Adjust the hammer till it is a good SD/ES and see how it does. If accuracy is good, then adjust the dwell til the SD/ES are as...

You shouldn’t need 160 on the reg. Agree you should check your hammer. Don’t forget that you may need to remove the stock to get the hammer spring low/high enough if someone else has adjusted it there. The hammer wheel is just part of the adjustment range. You can adjust it more by removing the...

Hey everyone. With the Benjamin Gunnar going on sale for $499 from airgun depot recently (where I got mine), and $599 in many other places, I figure there are probably a few people that picked one up. One of the biggest complaints I have seen about this gun, is the lack of a hammer spring...

There is only one hammer spring adjuster. Each click on the Micro wheel moves the adjuster a fixed distance. Each click on the Macro wheel moves the adjuster a distance equal to 5 clicks on the Micro wheel. The Macro is a coarse adjustment. The Micro is a fine adjustment. The regulator...

If you have an Edgun R5M or Leyla and 3d printer you can print this hammer spring adjustment tool.

Well, i don't know how Derrick does his magic.... but he can and does. AOA sells an air superiority power wheel adjuster (hammer spring?) unsure. but both my atomic and pathfinder use it.

"The katran. Even a superb gun like mine was/is. Will have giant spreads if the hammer is set incorrectly. The katran is very sensitive to this." So I can better understand, If the hammer setting is the issue, and I am able to get a decent setting on the hammer, the velocities should stabilize...

You asked about the Mora and not the P3.

Drop that reg down to 80bar. And adjust the hammer, should get those crossmans running mid 900s.

I have tuned my M1 25 cal to give me a muzzle velocity at the MAX setting. After about 50 shots, the hammer spring adjustment screw backs itself off and my muzzle velocity drops substantially. Before I pour a bunch of locktite on the adjustment screw to keep it from backing off, has anyone...

The macro wheel is kind of confusing at first. The micro is always where your hammer is actually at. The numbers on the side are really where your hammer tension is at. The wheel numbers are misleading as there is an internal adjuster that puts the wheel in the "range" of appropriate...

I added access to the hammer spring adjuster while the action is still in the stock. If you didn't see in the earlier photo the regulator adjustment access in in the stock.

FX Dreamline manual says to not adjust the hammer adjustment wheel when cocked. If you do so you will mess up that adjuster wheel and have to buy a new one and replace it. Ask me how I know.

You should see me adjust my idle air screws and my distributor timing with the force. 😂

When you say hammer spring maxed do you mean on the wheel or the Allen adjuster? If it is on the Allen adjuster and truly maxed you do not have it tuned properly at 115 bar. At that reg pressure you do not need max hammer pre load.

Got the Ronin in & tried a few rounds. It is indeed stupid quiet with it. all you hear is the hammer spring. I will try adjusting the hammer spring next.. Have new prism scope on the way.

Not bad. Looking for a compact gun, it's betwen Mora and the Ghost. Does Mora have a wheel to adjust the hammer?

The micro screw adjusts the gap. Less wiggle = more hammer spring, more wiggle = less hammer spring. People will measure the free space gap with calipers to explain where the micro adjuster is set to. If you cannot use all the settings on the dial then the screw is turned in too far. T9 is the...