Search results for query: *

mine connected to my iPhone fine. But to get started you do not need to, I never do. Set the correct model info in settings, put in your ammo info and then TURN OFF Ballistic Calculator. Then zero it and start getting used to it like a normal scope. Once you are very familiar you can play with...

I have a simliar 22 pellet trap but it splatters the lead everywhere, how do you keep the mulch in it? Does yours have a cover? Mine is just an open box with a hanging target clip.

Ha, I thought after 40+ years of shooting I have seen all the cleaning stuff, never head of this. Will give it a try.

How would you clean the barrel of a suppressed shrouded Avenger X? Unfortunately none of the bore snakes will not fit in the breach, the little metal piece on the end is too large. I would guess this is the same for most magazine fed PCP. I have only cleaned it once from the muzzle with pads...

putting a drop every 3 fillings on my Avenger X fill port helped a lot with the regulator. It is still not great but it does at least now hold some pressure for a while.

I have the Texan SS in 457. Works great and I get 3 shots with mine. Good enough to kill hogs at up to 70 yards for me. I think we need all the speed we can get so I prefer the smaller caliber. Still huge amount of lead compared to any rifle round.

wow, that is a big break! I am very gentle on my guns but that kind of fragile design is just not for me. I am also more of a hunter than benchers shooter and no matter how careful a rifle can fall over. I has to have enough design margin not to cause this kind of catastrophic break. Maybe the...

Seems like the overall consensus is that Daystate has good quality. I wonder if the grey stock which I think is laminated is more prone to cracking than the other stocks. Would love to hear if anybody else had a cracked stock and if so what type. Still hope to someday own a Daystate air rifle...

Update on my high end daystate experience. A few days after sending to AOA to examine the out of spec rear rails, I received a call from the service manager confirming my measurements. He also tried 4 different rings and none of them would fit the rear rails. He then told me that the gun would...

It’s easy. Just a screw on the bottom. Just make sure it is fully depressurized. dont forget to dry fire to empty the plenum.

I understand we should turn the grease screw 1/4 turns every few hours. I have only turned mine once. What is the recommended procedure. How much of a turn do you recommend? And how do I know when the grease is empty and what do I refill it with?

I have an Avenger X and have had regulator problems also. Seems to be a common problem with Avenger rifles. Mine still creeps but much less so now that I have dry fired it a lot. Also it may help to put some silicon into the fill port when filling. I did both and mine went from a pretty much...

I went though the same. Since I have more than one airgun I decided that red dot makes the most sense. Keep it light and compact. When more precision is needed I grab one of my scoped airguns.

My talon p would also be the last to get rid off. But I do enjoy my other guns more. If somehow it was down to one that’s the one.

My advise is to start with one of the higher rated lower end guns. That is what I did. 10+ years ago I started with a Marauder and a airforce Talon. Give them away when we moved. Reentered the PCP world with an Avenger X which is amazingly accurate and powerful. More recently a Daystate...

I travel a lot and when you can not take your powder burner, I just recently bought a Talon P. Maybe does not quite fit the "survival" but it is better than nothing for small game hunting and keeping a threat at least 30 yards away. Airforce Airguns are the only PCP I have never had a leak with...

My first PCP was a airforce Talon over 10+ years ago. Gave to a friend when we moved. Just bought a new Talon P and the spin lock wrench was missing. Less than 12 hours after I emailed I received an email from Rachel that its on its way to my address. I second the good customer service. They are...

Welcome back, I was in the same boat, many years ago, more than a decade probably I had a Marauder. Then sold it and only kept my springers. Now that I am older I am more flexible with work and life commitments so I am back in the PCP world. Started with an Avenger X and then bought a Daystate...

I didn't, started it first to see if there is something specific about the rear mount. Then after put a note on the Owners Thread to see what other people measure on their rail. Check the dates and it would have been clear chronologically.

Thanks. It sure looks like mine is just defective from factory. I sent It to AOA today.