Search results for query: *

BRK Pathfinder at the low price of $1599: https://www.airgunsofarizona.com/precharged-pcp/brk-pathfinder-w/folding-stock/ It must be made of gold. What can it do that a $300 PCP cannot do. It may give you slightly smaller groups.

I have 2 Notos and 1 Zelos. The Zelos is 2 times more expensive than the Notos. They are both great airguns, made by Snowpeak in China. I have more Snowpeak airguns than any other brand. My 2 Notos are shooting between 15 and 20 FPE and are accurate enough up to 50 yards. They are much more...

I have the Pinty bulpup (P35 clone) 25-28 FPE which has several rows of holes in the shroud. I covered the holes with duct tape and now is quieter to me the shooter. Maybe the shroud helps in some cases, but I have not seen any kind of study on this.

They seem to have a PCP with a colorful stock. What is so special about that? I have the Airacuda Max (in 2 calibers) and had to fix them on my own when they were brand new. One was leaking through the valve stem connection. The other one, the air leaked from the tube into the regulator and the...

If you buy the Aliexpress ones you get 5 springs. You may have to cut them. You need a chrony no matter what. You can try buying a stiffer spring (same length and OD) but larger wire diameter. This one has a 1.6mm wire diameter: https://www.aliexpress.us/item/2255800217904922.html

I bought for my Nova Liberty the hammer springs from Aliexpress. This is the link: https://www.aliexpress.us/item/2255800238212298.html I bought these dimensions: Wire diameter: 1.5mm OD: 9mm Length: 100mm See my selections in the photo

I am using a 3d printed Tesla valve moderator. My .22 Zelos shooting around 30-35 FPE is very quiet. If you are interested message me.

I have 2 Nova Liberty in action now and another one which I sold. I attached the schematic for the Nova Liberty.. If my Liberties leaked it was usually from the regulator block. There is a very small o'ring there which broke. The regulator is on page 10. The o'ring which gave me problems is...

The knurled/wide ends are on top. Read my post which has lots of detail: https://www.airgunnation.com/threads/umarex-notos-has-arrived.1281703/page-27#post-1503944

Yes, that is why I quoted the article in my post.

The info you provided was a shot string with a minimum and maximum FPS. There is not a single person on this planet who can make predictions based on that. Provide this info: -airgun info (specs, regulated, barrel length, etc) -pellet/slug weight on that shot string -count in that shot string...

I am out of this forum. As soon as moderator 3 bans me. Good luck to the rest of you !

Moderator3 Moderator Staff member Feedback:9 / 0 / 0 Add Feedback Today at 6:38 PM nobody1, Your post (When moderators break easily) contains Discussion of the creation, fabrication, or modification of airgun moderators: Rule #5 - The discussion of the creation, fabrication, or modification...

I am now using subscriber's Tesla Valve moderator for every airgun with a 1/2-20 adapter, at least 7-8 airguns so far, including a .22 Zelos. It is the most quiet one I tried. Ask subscriber to share the moderator print files with you via email.

Can you post the new Notos moderator files? I have your original Notos mod and it works well enough. But I need to be really quiet where I live.

If you insist on Gamo then for a little more money than the Gamo Arrow I (and many others) recommend the Gamo Urban.

I assume that you you have a chrony (since 800FPS is hard to detect otherwise :) ).. If it's 800FPS to 950FPS and back to 800FPS over 90 shots that is not a useful shot string. What actual shot string did you get?

My Kral NP03 are very accurate up to about 50-60 yards. I downtuned them (using the transfer port adjuster) to get 3-4 good magazines. If I increase the power they would probably be accurate even farther away. For longer range these are my favorites (in this order): Nova Liberty .22, Umarex...

I will soon have my Kral NP03 177 and 22 for sale. They are both in mint condition, never left the house. They are great short range carbines, but I am shooting longer range now.

Did you adjust the hammer spring? The hammer spring adjuster is usually at the the rear end of the air tube.