Search results for query: *

I can't speak for the HW100 I have the HW 110 and Hw44 with a 310mm carbine barrel,, they like the Jsb and AA branded pellets,,, 22 cal but for a lower cost the Norma Golden Trophy Heavy 17.6 gr do well,,, but the 15.9 gr shot poorly in any gun I own also the Norma Heavys do not do well in my...

printable targets here https://www.airgunnation.com/threads/printable-targets.561855/

THE MALE FOSTER on my cheapo easy fill that only see tank to gun has very little pressure indentation, I need a magnifing glass to see well,,, like ya said, yours was used on a compressor, while shoebox has a lesser effect,,, my most damage was done by a yong heng,, used for a short while,,, it...

show me the deformation on a tank to gun filling,,, where it has never seen the pulse from a compressor common you say,, then seeing it should be easy

the only place I have seen pressure-pulse damage is on foster fitting on fill line fittings, here is a example on my SPA brass fill probe

looks just like this Air Tex same model number https://www.airgunnation.com/threads/airetex-l110-mini-magnum-compressor.703732/

can you shim the rail? I do not have an Avenger or seen one,,, just asking the question,,since I see you have changed rails

T R Robb link https://www.trrobb.com/product/adjustable-pellet-seater

Coltri MCH 6 , 230 volt,,, the most money I've spent on one item,,, air gunning wise,,, the best money I've spent on airgun hobby well, I need to change oil ,,, again,,, been over a year, this oil change the nice thing is that is all I have to do to it,, besides fill air guns and bottles with it

I thought pellet pens were for loading break barrel springers/gas-rams, when out hunting,,, quick and easy to load, vs using a pellet pouch or digging in pocket for loose pellets "Beeman P17 Pen Mod" is an example

used a 1/4in bolt a coupling nut and a regular nut,,, chucked it up in the drill press and filed the od to fit my 20 cal, put a dab of epoxy putty on the tip shaped to fit the skirt,,, made it for my HW50 springer, yup 20 cal,,, adjustable seating depth

have you tried a little silicone lube on the slugs?

I keep my probes in 3 places , but not in the gun,, it is just a matter of personal choice,,, no wrong answers, 1: on the compressor hose 2: on the scba tank hose 3: in the storage box https://www.amazon.com/Plano-Pocket-Stowaway-Compartment-Utility/dp/B000EYW8V6/

Graphite in Pencils, not lead

he is stopping at the click,, he is just retighten the screws at the same setting, till they stop movement,, as they change a little while tighteing the neighboring bolt,,, overkill but ok this was required, but only at the final torque setting,,, when I did steam sight glasses I just don't like...

the guy in the video lacks knowledge on torque sequence,,, i AM NOT SAYING THAT IS THE CAUSE OF HIS PROBLEMS, BUT

reminds me of an old joke about,,, what is the white stuff in the chicken poop?

all the above waxes are good,,, but I found this and after 15 months still beads water on my car and is my prefered barrel wax,,, pulled my back out of wack buffing it out by hand,,, aint as young as I used to be https://www.collinite.com/product/no-476s-super-doublecoat/

we are missing the obligatory airgun content,,, @9:36 pm,,, are you sipping, toking or micro dosing? to go off wondering around like a lost soul, seeking confirmatiom, about nothing https://i.imgflip.com/1lgjmp.jpg off to social posts, is where this nothing burger belongs,,, where's the mod?

my Coltrii came wiith a almost 6 ft cord and NO plug I purchased my own plug and recepticle,,, to match the load, wiring, and breakers