Search results for query: *

I was just reading about the infestation. Have you knocked on any doors in the valley?

Hey guys, in Ca, have a 177, will travel, love me some gs slaying 😜

Hammering it would be better with material that soft, for the work hardening aspect. He said only .04” or so, I’d think a grade 5 washer would suffice in that situation.

Stick with the washer and use a file to create a burr, sharpen it like you would a card scraper. You may need to play with the angle a little, I’d start at 85* or so. A section of dowel with sand paper glued to it could work too.

Nice write up, cant beat that weather for the time of year. I may have to head over there as my club doesn't seem to have enough interest to get matches going again.

Jsb, AA, and FX 10.34’s shoot well in my U3 and in that order. The JSB’s are slightly more accurate and consistent shooting than the AA’s, the FX has fliers. Both the AA and FX look cleaner than the JSB’s.

I was that guy and bought an AGT Uragan 3, my requirements were 177 and will shoot pellets and slugs accurately. That being said, I’m already saving for the next high end rifle.

Welcome! I got my kid started on my old red rider, he turned 10 and i put him on my old Gamo 440, a break barrel. He’s a big kid and hasn't had trouble cocking it after we got his technique sorted. I’d hold off on a pcp unless you like to spend money and tinker.

A deck of cards or feeler gauges between the bottom of the scope and the rail will help get the reticle and bore aligned when you mount the scope. Love that flashlight trick, I’ll have to double check my setup with that.

Choices are 70 or 90nbr. Is there a manual that came with it? Sometimes they're specified in there. A call to the manufacturer works too. Hopefully someone replies with better info for you.

Looking at the amount of dessicant they’re using it is similar to mine on the input side. I have an Air Venturi 4500 and there is a filter on the HP side that is integral, i have an Alpha filter behind that. Only the bleed screw on the compressor’s integral filter ever blows off moisture. In...

Heres the LINK i was thinking of, worth a read imho. He discusses what happens to the h20 in the air amd waht happens as we compress the air.

I filter both sides of the input/output. I filter the input side because its easy and i had parts laying around but the output side is where you'll get the majority of the moisture out of the air. For what most pcp’s cost and the amount of maintenance these guns need regardless of how dry and...

What are you looking/listening for in regards to HS tension screw adjustment? Do i look for a plateau in speed then 1/4 turn when the fps flattens? There seems to be a lot of nuance with the balanced valve. Are there different spring’s that i can get? It would appear to my untrained eye that...

I went in a 1/16 of a turn and the velocity is still low. I want to be around 900-930 fps with the jsb 10.34’s. Current average is 883, ESof 5, another 1/16 or a little more should get me there (velocity wise). Assuming the fiddling I've done tracks with what im seeimg on the chrono, I’ll be...

I have a bench similar to the DOA, a Caldwell Stable Table. Have had it for about 15 years and used it primarily for ground squirrels, it has been a solid performer. My table was originally a plastic topped one that i immediately replaced with a plywood top. Of the two you asked about, I’d go...

Welp! We’re getting closer. I’m backed out 3/8 of a turn from factory and my fps with a jsb 10.34 is 877 fps. All pellets i have aren’t preforming terribly well at that power. Some fooling with HS tension helped with group size but I’m not happy with them and I’m assuming the reg isnt...

Ok, reread your instructions and realized I misunderstood. I definitely found that drop off. With my initial reg adjustment I was in the 940’s after turning the HS in a 1/2 turn from the drop off in speed. I think I blew it on the next reg adjustment with turning the screw the wrong direction...

I tried turning it out until it wouldn’t fire but that only left me with 1.5 threads of engagement in the block, that was before adjusting the reg. As it came from Talon it was about flush with the block, maybe 1/4-1/2 turn out. I also saw a big dip in velocity (~100fps) with it turned way...

Got a new rifle and it came to me doing 1029 fps, ~24.5fpe. I got it to hopefully shoot silhouettes and HFT so it needs to be >20fpe. I probably should have gotten a different gun but here we are. I’ve been reading a bit on tuning this type of rifle and have had some input on where to start...