Search results for query: FX M# Tune

Hi, i did some more testing and reduced the plenum volume and with a reg config of ()()()()( its possible to adjust below 50 bar i have ordered some clear pvc aquarium hoses. the pieces of garden hose do look pretty ugly :D https://youtu.be/kYkD9sXBeMs transfer port on max /...

Hi guys, Not that I want to stop with tuning but air is getting low. Saving it for fun shooting then its on to the springer until paintball stores are up and running again. I was having trouble with my slug liner and got some tips from Ernest from my posts on the Other Parts, accessories and...

Took delivery of my Avenger .25 July 29,fitted and zeroed scope (Hawke Vantage) regulator seemed maxed out so all first testing was out of the box. Using a FX radar,first pellets I tested JSB Exact King .25 25,39gr average speed was 944 fps,so running HOT Next up was NSA slugs 26,8gr average...

Does anyone know the specs on the FX OEM hammer spring? Specifically the spring constant (lb/in or N/m)? I had a “power tune” done by SPAW and now I have a heavier hammer that is hitting so hard that I am having trouble getting a proper tune to shoot lighter pellets. Think I might need to...

Few Months ago I found this thread and started power tuning of my FX Crown. That is reason for me to share my results on this place that can be interesting. My original local thread is: https://airguns-srbija.com/forum/viewtopic.php?f=4&t=1125 Second picture on local thread is from this...

Okay I went out for a long walk after even a longer walk today, so a total of 12 miles. On walk, round two, the emails started to come in on the tuning, some of the “nickeling and diming” thoughts and the modular platform. Disclaimer I am not expert on the tuning the L2, but a fast learner...

There's a lot to list here! FX Impact MKII in close to new condition! 580cc CF bottle (Born on 02/2019) 600mm .25 cal STX barrel with Donny FL special FX moderator. 700mm .30 cal STX barrel with FX 3pc. stacked moderator. FIVE! .25 cal side shot magazines!!! All in very good condition...

My impression of the Javelin slugs for energy dump on target is good, but I am using fruit at pretty much the factory setting of my Impact Compact. And if I compare the expansion of Javelins to H&N and FX Hybrids, the javelin are for sure better from my existing setup with punch on target. I...

Update: Nothing is working for me. I'm in touch w FX Cust. Service. I removed the slug liner and put in the pellet liner. I reset the reg back down to low 100's and I can't get a good group at 27 m where I zero. At this setting I'm getting an average velocity of 875 with an ES of 8 with JSB...

Jorge, I ended up at a very similar place as you have, with 2 Impacts, a Wildcat, Steyr FT, Steyr LG110 5.5mm and the brilliant HW30. Recently, I moved the Steyr’s and the Wildcat on. The focus has shifted to making the 2 Impacts consistent and accurate enough to shoot Benchrest at 50m and...

On You Tube, do a search for Ernest Rowe of FX Airguns and then find the video on the FX Impact regulator maintenance and repair. All of the videos they have been producing for the Impact lately, make it so easy for people unfamiliar with the Impact to do it yourself. You can watch the video to...

I don't know about NSAs, but H&Ns it shoots them well. I am located in Greece and Nielsen slugs are expensive, so I searched for "affordable" solutions. A friend of mine tuned an FX Dreamline to shoot very long distances with slugs, and he gave some 23 and 25 gr H&N to try .. this is how I got...

One of my favorite guns. The o ring mod works very well to eliminate bounce. I forget the name, so i call it the stale pastry mod because it sounds similar. Look up the A-team tuning for marauder. The pistol’s adjustment range is not quite the same as an m-rod, but the concept is. Hex is same...

I’m curious how a liner is expected to shoot without the external o-rings. I ask because on AEAC, in the Impact Review, it was noted that there wasn’t a whole lot of difference with or without the o-rings. I have observed with my .25 slug liner and without the o-rings, I’m seeing diagonal...

If your happy with it, leave it. But tuned like the videos, mine was shooting 18's at 950 75 bar. Valve adjustment turned into third line to bring it down to 925. Check the speed of your first couple shots after the gun has sat for an hour.

The gun is the model just prior to the X coming out, whatever that is. ST? It's a 600mm barrel and I used both the FX silencer and the Neil Clague. Ernest power tuned it, but it failed (main valve) pretty quickly. While it was getting fixed for that it got the MkII upgrades. It's got the...

So, as I wait for my 700 mm barrel/slug liner to come back from warranty at FX..(its been there 3 weeks and not even in the queue yet 😩), I have taken my 600 mm barrel and pellet liner off my gen 1 Impact and put it on my Gen2. I had tuned it to 880 fps w JSB MKII 34 gn and though it was pretty...

OK . . . . okey dokey. :) I got me a shooter AND I can (apparently) shoot those FX slugs that I bought a few months ago that my AA just doesn't have the giddy-up-go for. After getting to briefly shoot it yesterday with jsb 16's I could already see the potential that this thing has and...

I have seen Matt’s video/movie 20,000 times (it seems, Youtube algorithms!). I feel and know he is absolutely right in everything he says about getting the best from a slug liner vs slugs. He helped develop them, so he’s undeniably one of the most knowledgeable on FX slug liner tuning. I...

First, today was the first day I could go out to my "range" and the farmer wants me there at dawn before he starts working. When I got to my permission it was 3 C or around 35-37 F. The gun hasn't been adjusted since I did so Monday night, and had the 300 cc bottle filled to around 250-260 bar...