Search results for query: *

I sent an email query and received an answer that stated that yes, I could order a Mora in .25 with that cash back deal, but the 30% would have to be used before the end of October. They said the guns would likely be available in 60 days. So, my interpretation is that 30% is not cash at all. It...

How do I order spring # 2 from Wolftiek? What is the correct part #?

These springs fail only at maximum power settings. I have a V1 in .25 set at 710 fps with a 25.4 gr pellet. It has shot about 12,000 rounds without any issues.

Evidently I cannot buy a sniper MORA now and get the discount in .25 because they are not in stock. If I am wrong, please let me know.

Most of these adapters add too much height to the sight above the barrel requiring hold over and under sighting. These add very little, if any, additional height. Highly recommended.

Donny, In most cases moderators mount to the shroud not directly to the gun barrel with a proper register guaranteeing correct barrel alignment. This creates in many cases misalignment between the barrel and moderator bores. Even if this misalignment does not cause clipping, it will influence...

The POI shift you are experiencing has more to do with the gun's recoil rather than moderator interference to the pellet's flight path. Hanging mass on the end of the barrel will have a great influence on the POI because the recoil with a springer is notoriously damaging, especially to scopes...

In order to create a barrel to projectile seal, all projectiles (bullets, slugs or pellets) are always larger than the barrel ID. This does two things, first the projectile is swaged to conform to the barrel size creating a gas seal and secondly to cause the rifling in the barrel to grip the...

Dan, just a suggestion, every gun has a personality and is usually unique in its own way. I think you should just use it for a year or so before making any changes. You, as an end user, need to get familiar with those idiosyncrasies before making any changes. I had similar feelings when I first...

Consider yourself lucky. It is the chamfer that acts like the case flange on powder burning revolver cartridges.

You may note that the pellet skirt must be larger in diameter than the pellet head. It is the skirt that is supposed to seat in the small chamfer of the magazine's bores. It is that chamfer that is designed to prevent the pellet shifting forward in the magazine which allows the pellet to jam the...

Mark, as a builder of these things for years, I can tell you that misalignment will cause loss of accuracy and clipping without necessarily leaving marks in the moderator. In previous posts I have offered to make alignment test rods for others. To my knowledge, nobody offers these for sale...

Carbon fiber wrapped tanks are actually aluminum and wrapped in CF. Fatigue is what kills HPA tanks regardless of material. Every time a tank is filled, it expands then it contracts on discharge. There is always a fatigue limit before failure occurs, hence, a use time limit. Aluminum has a lower...

I think this is a non-problem. Just refill the tank after every magazine. Problem goes away.

I find your criticism out of order. You just spent a lot of money for a gun you just received and you are bad mouthing the gun with no experience using it. Furthermore, you are spending even more money buying parts you do not need based on comments from others not your own personal experience...

The reason I bought mine many years ago now was the weight and balance closely resembled the Thomson contender. I was not disappointed.

Value for price makes it the best deal in PCP guns without any doubt.

Of course it is not harsh. It's truthful. We do not know who left the pellets in the weather. The OP did not say, Why do you think it's harsh?

Please explain how you dial in the barrel. You may note that the barrel is indexed by a key, which is necessary to assure port alignment with the receiver.

Lead oxide (corrosion). Cause? Neglect, laziness and perhaps ***disparaging remark removed***.