Search results for query: panthera tunes

My FX Panthera 700 came with a leak on the regulator valve from factory. I know that it is a different gun, but this is a common place where leaks can occur in these guns in general. Just try to adjust the regulators a tiny bit (e.g. 1/8 of a turn left or right). I did this then the leak...

When I think about airguns I'm thinking pellets. That being said, I am curious about slugs so I bought a FX Panthera to play around with them for a while. Once I'm done, I'll likely put a pellet liner in the Panthera and tune it to 25 g pellets. Each to their own! Good luck and have fun...

Hi buddy, thanks for your reply. How do you do large Hp? Can you change how deep you can go with the HP pin or you need something else?

I can give my opinion. It isnt worth much but its free!🤣 I have been swaging with Corbin equipment for about a year and half. I started doing 22 slugs then for my 45 longrange muzzleloader now 25 cal airgun. I have dies in .218 to do flat base , dish base and cup base. my experiancee the cup...

So got a new panthera and worked on tuning it even though I can’t take the reg over 150 on a brand new gun cause of a bad prong seal…. Ended up staying at the following and shot the gun out to 100 yards today…. I’m a brand new shooter so I still have a lot to learn and techniques to learn but it...

Same deal with the Panthera / Dynamic / King. After a good bit of tuning polishing etc. my gun is almost perfect, except for the first 2 shots after not using it for a while. This is tuned @950, about 50 fps below the knee, which is where my gun is most accurate after the 'warm up' shots with...

I looked at all the contenders and revisiting those that I wrote off previously, Taipan Vet 2, BRK Ghost, RTI P3/Mora, Epic Two, Leishy 2, Fenix, Skout Epoch, Huben K1, Panthera, Crown, and few others, they just have way too many shortcomings that I can't overlook or compromised, especially not...

Thx I own several pcps. My panthera needs to be adjusted due to reg and hammer 98% of max to that reg to get 3-4 fps spread. If I only adjust with hammer on a fixed reg - spread is 30fps. I own a DRS but barreltube has a fault - so liner is loose inside with both a carbon sleeve and with...

Mark, I bought a King in .22 with a 500mm barrel early this year. I could never get it to shoot .22 pellets worth a darn. It shot the FX Hybrids really well (at about 1050 fps, also the Zan heavier .22 slugs). To get it to shoot the 18.1 JSB pellets I put in a lighter hammer weight and...

I have both. Well actually I have a Panthera and not a Dynamic but they are basically the same. I absolutely love my Crown MK2's. I have two of them. However, I much prefer the tuning ability on the Panthera. The only real drawback to the Crown is that you have to remove the stock to make the...

Hi, Im owning my Dynamic almost a year but to be honest never was satisfied with it because of several issues and issue chains, but since this thread is not about this lets ignore the before of the rifle. I just decided to sell it and the buyer wants to use it for some long range (as i wanted...

My Panthera is bone stock shooting 40 grain ATP kings, and I’ll head shot squirrels at 200 yards like it is nothing. Same thing could be said about the BRK ghost with all the add ons it has. If there is a market for it they’ll make it. Your point is rather moot. I’ve had a P3, those RTI guns are...

Hey Jim! I only have a Redwolf in .177 right now, but same deal just a lot less power. My panthera is tuned for slugs, but you are more than welcome to shoot it. If I was in your shoes I’d go with a panthera, or impact. I’d get involved with 100 yard benchrest, but there is no club near us...

I shoot out at Ione as well. This is Cameron W, we may have met. The issue with the RW for benchrest is not being able to tune it on the fly with external adjustments. You gotta take it out of the stock and hook it up to a programmer, or get a heliboard with a lot of different settings. The...

Thank you for your reply and I definitely will watch the youtube movie! In crease of the hammer tension increases the velocity in my situation. I went op to 3.4 and velocity is only increasing. As I am trying to find top of velocity curve -10% (ref for tuning found in this forum) I did not try...

As others have stated, a bad tune and it wont matter what brand you put on it. I have never been impressed with DFL. I own 4 of them and none of them are on a gun anymore. I am currently using either Impulse Air or a new brand called Sonus. Of the two I prefer the Sonus. I Am running three of...

Quick update. Did some tuning with the help of a friend across the pond and opened up the ports and upgraded the hammer spring to an impact hammer spring. Moved up to the JTS 29.6 grain pellets. If you take the zone from 165 - 200 BAR I’m getting 20 shots with an ES of 8 That’s pretty good...

In this respect I would like to share something here. I am shooting springers since I was a small boy but I am new to PCP’s. Ten months ago I’ve purchased a Panthera .22 600 mm and some different types of pellets and slugs. Pellets: JSB jumbo heavy 18.13, FX 18.1, H&N Baracuda match 21.14, JSB...

I don't understand you difficult with 25 caliber. Any of my fx guns will shoot 25 caliber pellets or slugs very well. Even my crown will cut a rugged hole at 100 yards with the hybrids. I'm not familiar with 25 caliber not being accurate. My panthera in 25 caliber will shoot little dime size...

The barrel coming loose is not cool especially since they use 3 large grubs to hold it. The newer HM probes are indeed locite . BM & TM are not & use a different system to hold then from threading in or out. When you put barrel back in how did you index it for port alignment.?