Search results for query: panthera tunes

I have shot a King but do not own one. I do have a Panthera 25 and it is basically the same gun mechanically. I do not like the King because of the stock, specifically the grip. It is too large for my hands. I would go with the King. I own 2 M3’s and two Pantheras. The Pantheras are super easy...

This is going to depend on what you like more than anyone else, and I would even say money… The King is, as you stated a rifle platform, so the ergonomics are different and can be better for bench. It is long and skinny… The Impact is tall and short and can be harder to balance without a wide...

It applies to every modern PCP. I always shoot 18s at an average of 940fps and max it out to 990fps depending on the day (weather, altitude, humidity, etc) using my FX Impact, Crown, Wildcat, Panthera, Maverick, Brocock Sniper HR, DSRW HP and GCMAG Magnum Gen2 diring competitions. 890fps is a...

Very nice and hello from Summerville S.C.

Background: This past year I renewed my interest in PCP air rifles and set forth to improve my accuracy. Years ago, I used a bench that I constructed which, along with the rest, was both challenging and cumbersome to move in the hallway space designated for the hobby. With a background in...

This is a very accurate and highly reliable Original EDGun Leshiy classic with a one of a kind ARCA Swiss handguard with a removable M-LOK attached Picatinny rail and Magpul AFG-2 fore grip (FDE or black). I fabricated this handguard from an FX Panthera factory rail + accessory bridge, and it...

Hi and welcome! I'll start with some short advice for each of your questions, since I have been through all of them on my competition gun. LOP: Nope. The Panthera back end squishes you with the bottle behind the grip. Also to answer your Huma 1st stage reg question, IMO it is not practical with...

My first thought on reducing length of pull would be to convert to the Dynamic rear end. That could net you more air as well. Not sure how else you could reduce it aside from a new chassis. The Saber Tactical chassis for the King/Panthera/Dynamic looks to have a shorter pull, but you will...

Hey, gentlemen. Need some tips on setting up an FX Panthera I recently acquired. I shoot NRL22, 22x, PRS rimfire, etc. Currently run a full custom Vudoo 360, G3, ACC elite, all the bits. Would like to get this setup to use at matches. Had a guy in my squad at the TN night match before Christmas...

Interesting. I’m curious to try out the ELR ZAN in .22 and .25. Did you test the .22 or .25 ZAN ELR? For both the Altaros .22 at 40 grain and .25 at 49.5 grain I’ve got approx 0.20 to 0.21 G1 BC. The .25 in both 1:18 and 1:16 twist shot about the same. I’ve also shot the Altaros .22 caliber...

Thanks. The mentioned BC that other “influencers” have reported, we noticed one of those was not accurate. The 5 captured speeds at different distance wasn’t being captured by his FX chrony (1 of 5 or 0 of 5) and the sample data was very limited with the last captured BC being way too high for...

I have 2 mid powered .22 caliber slug guns that I used for the test. Neither are "maxed out" as I prefer the dynamics of a smooth shooting airgun over a "strung out" airgun. Here are a few existing profiles I pulled out of my Element Ballistic app: FX Panthera 600mm 1:18 set to shoot 30.5g...

I tend to agree Headshots. What we USA Crown enthusiasts have going for us is all the countries with power restrictions on air rifles. I’d imagine that tuning DOWN (to say 12 ft/lbs) a Panthera that was designed to sling slugs in PRS competitions is at least as difficult as dialing UP the...

Not your average Maverick. Benchrest ready out of box K&L chassis K&L KLS-3 benchrest buttstock and bagrider K&L weaver rail ( gets bipod out a bit farther) Sabertactical adjustable cheek rest Sabertactical TRS top rail Sabertactical vertical grip Custom brass trigger shoe Donnyfl tanto 700mm...

Sorry for very late reply @GA_LeadHead. What are you settings as I have similar settings but with a 600 barrel and 700 and 300 dual bottles. Also using the slug liner and slug kit probe and hammer? What is your panthera’s reg micro and macro. Hope you don’t mind if I ask I cannot find any tunes...

I shot my Panthera 700 for the 1st time today.. I bought it from Utah Air Guns and they tuned it for FX 44.5 grain hybrid slugs. Cross winds were 5 to 10 mph and it was snowing. 1st pic was 50 yds after getting sighted in. After sighting in I figured out my dope at 50, 100, and 150 yds and I...

Hey guys this is my build that could be yours (scope ryu and 700cc bottle in pic I’m keeping but everything is negotiable lol ) started life as a mav vp and can now run 40gen zans to 1070fps its happy place is around the 1020 mark at 185 bar but that was also around 90% humidity to so it can get...

Started some slug testing in my orange Skout Evo. I have .22 and .25 barrels and tested Altaros 49.5 and 60 grain in .25 and 32.3 grain in .22. Didn’t have any 40 grain “Toros” available but will test later. The .22 Toro in 32.3 shot very well at 930-935 fps and the tune is excellent. Snapped...

To answer your question directly, I use my maximum magnification (24 and 25 power) for shooting paper. Most of my homemade tuning targets feature a tiny (1/8") aim-point that I need to see at 40 yards. And now for a bit of rambling on with my thoughts on scopes... 😁 For my plinkers and...

Zeroing and setting everything at a temperature close to what your "game time" conditions will be usually has the best results. I have a cold weather and hot weather load for my center-fire rifles. Might want to run more economical settings for cold weather as air usage changes in extreme cold...