Search results for query: *

The aea SF uses a similar air tube and regulator set up. The reg pressure on the SF are typically between 150-200 bar. I would double check and see if karma wants you to drain the air from gun to turn the regulator down. I know going up under pressure is ok.

In racing (f1 and moto gp) the driver /rider is only as good as he can be on the equipment his manufacturer, team, and sponsors provided him with. Sometimes the racer looses because the other team has better equipment. Its not that he couldn't beat the other driver, he just couldn't beat the...

Last time I had trouble with not being able to adjust a scope it was some cheap utg scope rings causing the issue. A one piece cantilever scope mount can provide a solid way to attach to a rail. What about something like this 20 moa mount. https://a.co/d/g8rNqZF

Looks like a hatsan blitz reciver, the best I can tell from the picture. Full auto very fast cycle rate. Like $800 on pyramyd air.

Its hard to tell, but in the picture It looks like on the neck of the bottle there is a foster fitting opposite the pressure gauge? The fitting is where you plug the compressor fill hose onto. Take some closer photos of the gun where i said to look. Next thing is you need a pcp compressor to...

They look nice, lots of videos on YouTube today. Hopefully they make .25 and .30 eventually

https://a.co/d/hW6OKiV https://a.co/d/fCmlPfF You need a 5 gallon water bucket, and i have a fan blowing across the motor to keep it cool. Both will work fine the twin cylinder is faster.

What compressor do you have? Budget air cooled compressors at the most are capable of filling a 1-2L tank. If you want to fill 6.8L tanks you need a water cooled compressor. When i started out, I bought a vevor shoebox, and it was capable of filling guns only (i still have it, it works fine)...

I wouldn't call this a safe. More like a cabinet with lock. They fit 6 pcp rifles Assembly required https://a.co/d/fWqYy2n

What thread size for the more m8?

This listing has been renewed

Wait til you try a pcp rifle. You will love it!

Very good pellets. Weight is on point, they are clean, no dings and dents. A few dollars more a tin is well worth the consistency you get. I don't buy anything else for pellets.

All of our equipment has an expected lifespan. At some point guns or compressors will leak or break and require repairs, or need replacing. I have the exact opposite issue, i love tools and equipment....I find comfort in knowing if something happens to my compressor i have a yong heng with new...

Same thing happens with my karma eq 30 cal. When I stop using it the regulator will creep 300-400 psi. It takes a few hours of non use to creep up. I contacted the dealer and I was told to " just take a few shots to wake it up. All guns creep". " you need to wake it up"...... That wasn't the...

Vevor has decent stuff i have an air cooled shoebox compressor that still works fine. They just came out with a twin cylinder shoebox compressor. Its twice as fast as the single cylinder. There's a youtube video.

I think its worth a try to buy the $40 valve from Amazon. If it leaks you send it back, no problem.

Im sure that valve is fine. I would have no worries. That will do the job. Or you can take the scba valve off completely and replace it with one of these that thread directly onto the tank https://a.co/d/2e7gCI3 https://sabertacticalinc.com/products/tank-valve-st0031 I have both, the saber...

With o- rings 23mm refers to the I.D. (inside diameter) . For the outside measurements you double the thickness 2.5+ 2.5= 5mm. This o ring would be 28mm outside diameter

Go with a 30cal, 25 is very close to what you already have.