Search results for query: *

don't worry, our gauge perfectly fit your Delta wolf, no matter the 25std or 28pro, check the pictures

You’re absolutely right! As long as you hand-tighten it without applying excessive torque, it should be totally fine. Also, using the Outgun angle bracket is a great setup. I’ve attached a reference photo for you （above）; it not only ensures a secure fit but also makes reading the pressure much...

From what we’ve seen, most Daystate models that can fit our digital gauges—like the AlphaWolf, DeltaWolf, and BlackWolf—have had users share installation photos with us, and none have specifically mentioned Dowty seals being an issue. It seems like these models typically use O-ring seals, which...

Thanks for tagging us—we really appreciate you bringing this thread to our attention! It’s great to see the discussion, and we’ll jump in to share any info that might help. Feel free to let us know if there’s anything specific you’d like us to address.

woo！we'd love to see the picture of your Outgun gauges:love:

Here are some photos shared by other users who installed our pressure gauges on BRK Ghost. As there is no stock limitation, you can choose any size according to your functional requirements, aesthetic preferences, and budget. We hope these photos can give you some inspiration. If you have any...

Hey everyone, Glad to join the discussion, from what we’ve learned, the BRK Ghost does come with Dowty seals on both sides of its factory gauges, but there’s a key difference in how the air flows through each side—let us break it down: For the high-pressure gauge (reading cylinder pressure)...

It's 1/8NPT for the air force, we've talked with John, no doubt about it. And we'll add this thread to our latest Gen-2 25pro very soon

1/8NPT

It's always the 1/8npt for the air force and seal with Teflon.

Hi Glenn, Thank you for reaching out! I'm sorry to hear that you're having trouble with one of your gauges. Based on your description, it sounds like you have our Gen-1 28 Pro gauges. For all our digital gauges with built-in batteries, we strongly advise charging them at least once every three...

Hi! Thanks for sharing your detailed experience with our adapters and gauges. Regarding the stability of the side adapters, they tend to secure more tightly above 50 bar. This is by design, as we primarily intended them for use on airgun cylinders and regulators, where pressures usually stay...

Hey, we've launched the Pro version with shorten thread, here's the link: https://www.sekhmetonline.com/collections/gauges/products/shorten-thread-1-8bspp-gen2-28pro-sekhmet-gauge-300bar-only-for-raw-hm1000x

Totally feel you—the stock Uragan2 gauge is super tiny and stuck in such a tight spot! The side mount bracket is a game-changer—it extends the gauge out, so you can use 25mm or 28mm gauges no problem and check pressure way easier at a glance. The Sub12 Airgunners actually did a review of the...

Hey Mike, Thanks for the positive review on our Sekhmet gauges! It's great to hear they're performing well for you. And Yes, a very good point: keep up with the regular charging （ like every three months) and they should keep ticking along nicely. We're all about customer feedback, and we aim...

Sorry to hear that the update didn't include what you were looking for. However, we've fixed the issue where the regulator mode wouldn't stay on and also made the response speed even snappier. As for the screen getting stuck, that's a hardware issue with the screen itself, so it can't be...

Glad to hear your gauge is ticking along nicely—that's just how it should be! Even though the battery is super durable, we recommend giving it a charge at least every three months to prevent over-discharge, which can take a toll on the battery's lifespan. Nicole

Yes :p

Sorry to hear about the issue with your gauge not staying in regulator mode. We've fixed it with a firmware update, and the new version is 24D19. Just drop me an email or a private message with your order details, and we'll send you a data cable for the 2nd gen upgrade. It's a quick process on...

Hey there, Sorry to hear about the bug with your gauge. We've got it fixed with a firmware update, though! The new version is 24D19. Just check the device info in the menu to see if you're on the latest version. If you're not, shoot me an email at [email protected] or a private message...