Search results for query: *

Hello. I received the huma regulator with plenum and installed it on my P15. Setup: 140 bar (chinese was 135 bar) HS backed 1/4 turn from full lock . On 18.13 JSB I got 890 fps (was 860 on chinese reg) On 21 grain i only got 812 fps (was 775 on chinese reg) Shot count from 230 bar to 140...

I ordered huma regulator with 12cc plenum hope i can do 850fpd on 21/23 slugs

Mine shoot 850 fps so I don't need it right thanks for clarification

Hi anyone has tried this power kit for Artemis P15? It says 5mm ported valve. Pros and cons?

P15. Im shooting 18.13 jsb at 850fps that's why im limited to 85m zero on my Pard

On Pard NS 4k maximum down range of vertical Y axis is maximum 102. I can't zero my PCP riffle beyond 85 meters so I need 20moa elevation mount.

Hi. I got westhunter adjustable mounts (photo attached) There is 4 white lines . How many lines should I go up to get 20moa?

Thank you. I will buy and install it to see what will happen.

Thank you. What did the plenum improve exactly?

Hi again. As per Huma we need to check the step inside the pressure tube and it MUST be equal or larger as 82 mm if we want to install the Huma XL version (instruction photo from HUMA attached). The XL version here...

$595 in my country

Guys. Since Huma doesn't ship to Lebanon What about Altaros regulator for the P15 any one tried it?

Artemis P15 5.5mm

Beirut

can't ship from europe those items are prohibited here. I can only ship from the US

I went to those 2 its not listed they have rebuild kits and regulator tester only.

Guys. I searched the net couldnt find Huma regulator online shop in USA. I need the Huma for my Artemis P15. The normal one and the Xl one. I appreciate you help finding those 2 at an online store in the US. Thank you

I want to thank all of you for helping me solving my p15 problem i really appreciate giving me instructions i couldnt do a thing without you guys. Thanks again Tony

1st test after doing the regulator with different HS positions. Its consuming too much air when reaching 200 bar at full HS lock. Will keep testing to full string and posting results.

Working slowly. Noticed that all screws and bolts are loose. All of them. Silicone grease in the air tube but not too much. Regulator looks fine from outside but inside probe is covered of buildup and lots of silicone . Photos attached.