Search results for query: hammer adjustment

I have the tungsten hammer weight in my M3. With the reg at 165 bar with stock hammer weight, you would have the hammer spring tension almost maxed out. Keep the tungsten hammer weight. With the valve adjuster 1.5 past the 4th line you are probably wasting some air. When you get your new...

You guys need to back that hammer spring adjuster off. Or continue to have valve issues.

Its realy nice indeed :D just a question, would it be and option to make a hole for the hammer adjuster and reg so you dont have to take it out to adjust? 😍

2250 2240 And this one. Adjusted the hammer spring and trigger pull.

Thank you.

Check that the hammer spring tension is adjusted properly. If it is set too heavy, the gun will expel more air than necessary and be loud as a result. https://www.airgunnation.com/threads/average-fps.1296116/#post-1559114

Remove the hammer spring from Huma. That is too much. I tried it aswell, lightest Huma hammer and Huma spring and I was not able to adjust my hammer properly. Just use the lightest hammer from Huma, that is enough for 130 bar

Thanks Ok, Understand. If that is the case then I dont need to remove the screw because it's sliding fine and the wheel turns fine too. Did you mean to say the higher the number the less travel for the hammer? Because when the wheel is on MIN, the slider can move closest to the wheel and...

Anyone take their 22 call and make it a 177. Is there more than a barrel change required Presume the hammer spring pressure and perhaps the air valve to be adjusted

I am trying to get the max fps out of my Mk2 PP 25 cal (with a slug power kit) & have turned the hammer spring screw so far in that one side has come out of the hammer adjuster it also seems to be backing out so i have put some nail polish to stop it.

Wow, that looks really nice. I did not know that the DRS Tactical now came with an externally adjustable hammer spring and regulator. in my opinion that is a great improvement. Thanks for sharing your new “toy” and even more thanks for the information about the new DRS features. Kenny

Thank you, Scott Your advice is always appreciated & well taken I do understand the effect capping the hammer can have on things If I were to obtain a spare Vet 1 hammer, do I stand a chance of accomplishing encapsulation with only a drill press & hand tools? I'm sure you can tell that I have no...

If you notice the ES increases, remove the action from the stock, remove the Hammer Spring adjuster, the spring and the hammer. Then wipe out the action with a lint free cloth to remove any grease or debris buildup. Add a couple of drops of light oil to your fingers and rub them on the hammer...

Never heard of the “knee”, as most of the YouTube tuning videos suggest finding the plateau and that’s your balance between pressure and hammer spring. I decided to adjust to the knee on my .25 DRS Tactical, I found the plateau at 934fps at 90bar, adjusted the hammer spring wheel down til I got...

The ghost is nice,got it the first time I when to AoA. Same hole at 50 yards

I have seen a YouTube video of "Shooting With Phil" in which he installed a micro adjuster in FX Maverick for hammer spring adjustment. Pics below: The idea looked promising to incorporate in RAW HM1000X. I shall install this micrometer in RAW HM1000X inbuilt with anti hammer bounce device...

Since I got my new Zelos I've been obsessed with its tunability, particularly regulator pressure vs hammer spring tension. Thanks to the knowledge and experience of members here, I've learned a lot. After many test sessions with a chronometer and varied regulator pressure vs hammer spring...

Dead on. the valve is the " make this hammer setting work" cheat code. I do the same. Find velocity, Use valve adjuster to tighten it and micro adjust HS to perfect.

The Marauder is probably one of the simplest and least leak prone PCPs. The rifle needs to be resealed. And it would be prudent to determine first where it is leaking from. Tightening the hammer spring adjustment or TP restriction has nothing to do with a leak or no leak.

If your reg was at 90b from factory 3/8 lower should put you really low… like 50-60b low. I think thats (way) too low for the reg, I’d go 1/8 in at least… On other thing: did you ah e to carve out some part of the stock to make the hammer adjust fit? If not your hammer is probably still too...