Search results for query: hammer adjustment

Can anyone tell me how to adjust the hammer spring on the hammerli pneuma? And what the correct Allen key should be used?

May be something in the hammer springer adjuster.

I’m probably about 85 clicks in on the hammer spring at 100bar. If going up on plenum pressure would require a heavier hammer spring adjustment wouldn’t it defeat the purpose. I’m thinking that the lowest pressure to get the desired velocity would be the best option, am I wrong?

Also, some of the Zelos are coming from factory with to strong of a hammer spring and the stock doesn't have a deep enough recess to allow you to back the hammer spring adjustment out. With a few measurements you can use a 5/8" paddle bit and drill a hole out through the back of the stock butt...

I love my Maverick...

If you have a .30 cal Karma Red Panda, here are 2 things you should know. First of all, I am not a pro shooter, just a guy with an airgun. So this is just my observations. I think my RP is the best PCP I own and I have 4 other airguns in my stable. I must have shot over 900 rounds of 10...

Just want to discuss the effect of heavier hammer and lighter hammer spring in Impact. It has free floating hammer, hence no double bounce causing wastage of air. In order to control the dewel of valve, we can install heavy valve return spring and can also adjust the valve travel. I...

These threads will most likely answer your question. https://www.airgunnation.com/search/8190748/?q=hammer+adjustment&o=relevance

Nicely done Sir!

You are welcome. I found out that the hammer spring and adjustment screw had to be back all the way out. If you take the butt pad all the way off you and adjust the hammer screw out more you will see the 60b gain more fps. Seen / heard in your video how it sounds. Also seen in the video that...

...🔴 REASSEMBLY ▪Video: ▪Text with a few pics: https://daystate.com/wolverine-r-assembly-guide/ 🔴 HAMMER ADJUSTMENT (EXTERNAL) (HST, but technically it's hammer weight adjustment) ● Video at 25:22min: ● Video — here for Revere 12FPE, but the same for the Wolverine R HiLite: ●...

Another thing does your rifle have a pin probe or pellet probe! The pin probe allows more airflow than the pellet probe. If you buy a slug liner get the slug kit. It will have the heavy hammer and hammer spring along with the adjustable pin probe.

Spring disc regulators are adjustable NOT variable and once set should be left alone. They may be adjusted to increase output pressure with the rifle at operating pressure because you are decreasing the force acting on the inlet pressure valve seat during the adjustment. With the rifle at...

I thought I read or watched somewhere there was no spring pre load adjustment on those. It was hammer throw or something like that.

...that was in front is displaced around the hammer or if the hammer is vented through it, it is net, net. The amount of air residing in that space is unchanged. With a completely discharged rifle, dry firing it, I do feel a tiny, tiny, puff of air through the hammer adjustment hole, not very much.

Has anyone seen or know where to down load a exploded diagram for the 1358? I would like to change out the hammer spring but I am a little leery of just unscrewing the power adjustment bolt not knowing what else is behind the screw.

actually the hammer screw/adjustment will move on the threads, its internal kinda

Does that also apply if the airgun is regulated?

For the U2 600mm .177 I polished the hammer spring seat around the shaft, sanded and polished the base that sits against the hammer adjustment. Polished the hammer spring everywhere but the spaces in-between as well as the hammer contact surfaces. And reduced the reg again by another 10b to test...

I just got the 250z in .25 and was curious what everyone else's experience is with the hammer spring. I've increased the reg from 2000 to 2400 and I'm having a hard time getting the FPS to settle. I seem to get highest speeds at 0-1.5 turns in, but the ES still jumps around 5-10fps and it'll...