Search results for query: *

I ran it via AC, which I'm aware is less efficient due to converting from DC to AC and back again. I'm not super familiar with EcoFlow's competitors, but none of the smaller EcoFlows have sufficient DC output interfaces for the compressor. I'd need to re-run my wattage test of the compressor...

I have been able to use an EcoFlow River 3 Plus to power my JTS comp1. Not all portable batteries will work due to wattage output limits, but a river 3 is sufficient if you disable "Xboost" mode. I haven't done a max runtime test, but it's enough to top off an FX impact several times.

None currently in production. The Sig ASP20 was an anomaly since it was the only high end piston driven rifle made in the US in recent memory. It's unlikely that you'll see another one either, since there's far more interest in the PCP market and it's more financially viable for manufacturers...

I've had good success with the Discovery 2-12x24, although I'd call that an MPVO. There's an extensive thread on it here. https://www.airgunnation.com/threads/discovery-knocked-it-out-of-the-park-with-this-model.1331853/ I only used it for a very specific format of competition that required sub...

Every brand has different ways of handling customer issues (or not handling them) and that experience will vary by country in many cases. From my previous experience working on the sales side of this industry, most of the budget brands have issues with this in the US. In Canada, they dump most...

What barrel length do you have? I'm not immediately familiar with tunes for a compact, but I would start by decreasing your regulator pressure. If the regulator pressure is too high, your hammer spring won't be able to overcome it. My 600mm dreamline classic, with a power plenum can get around...

I suspect the general underperformance of .25 in the competitive scene may have something to do with it. Most of the ammo developments seem to be focused on .30 as well, with some trickle down to .25 shortly after. If there were energy limitations in 100 yard benchrest, .25 may make a comeback...

This has been my experience with one of the CS3s, although both gears failed at the same time.

BKL would be my first choice on a springer. Their adapters don't require a stop pin and they don't introduce any cant

The Benjamin Marauder pistol or an Air force Talon are probably your only choices. With the current pricing from Pyramyd Air a microstrike is still less expensive than a Marauder pistol and has a lot more going for it feature wise.

Older Dianas (older is a vague term) are known for having more barrel droop than average and usually require droop compensation mounts. UTG used to make a dedicated mount for the fixed barrel T05 Dianas and one for the T05 break barrels. However, shortly after the T06 models were released, UTG...

I can't really speak to how well the scope would hold zero in a drop circumstance. There was one situation where I needed to re-zero it after the rifle took more of a jarring than normal during transit. However, I cannot say with 100% certainty that it was just the scope at play, since there was...

I've had this happen with a Discovery HT 3-12x40. I would say you ended up with a lemon. As for the magnification ring, mine is on the stiff side, but it's workable. The parallax wheel is quite comparable to some UTGs or other scopes in the $200 range. I made a side wheel for mine, but that's...

I've used one in a "Micro" Silhouette match (silhouettes of approximately 0.5" kill zones or less between 5 and 20 yards) with good results. The scope lacks a shallow depth of field that is typical on most FT scopes with large objectives. You can still mount a custom side wheel and range fairly...

Agree, the 2-12x24 fits a special niche for airguns. I have one and it's a really nice scope considering the price.

The element Helix lineup is quite respectable in my opinion. They have a somewhat tight eyebox, although most similar spec scopes do. I have no complaints about mine

Some impacts have 6 lines on the VA rather than 4. I don't know the exact reasoning behind it or when the change occurred. Most of the advice that you've been given is assuming that your VA only had 4 lines. The VA is quite sensitive and the change between 6 and 4 would be significant. I would...

You should be able to go beyond 880 fps with the 33.95s without changing any parts. As previously mentioned, de-gas the gun and start over. I would open the valve adjuster beyond the 4th line and start around 120 bar. If you are still nowhere near 800 fps, there's another issue at hand. This...

I have the 2-12x24 and I'm really enjoying it. I can't find details on the parallax specs for the 3-12x32. Does it also focus down to 5 yards? (or meters, I guess they don't specify)

With an unregulated gun most people will pick an acceptable extreme spread of velocity. What goes into picking that range will depend upon your situation. If you're shooting in your backyard, a 50-60 fps extreme spread may be acceptable. It's very helpful to actually plot your velocity data and...