Search results for query: first air rifle

Most European mfgr state to replace certain items like air tubes after a specific time limit - again, I would specifically ask a the manufacturer about any specific items you have in question. Go to the source. as I first mentioned, your going to get a wide variety of different information and...

Hello have an ATAMAN M2R BULLPUP in .357. Has been in a case for 4-5 years and has leaked all air out. Tried to fill but air blows out barrel. Even cocked rifle first and used scuba tank with 3000 psi burst with no luck. Anyone know where to get a disassembly diagram or video that will help ...

Using my sf compact as an example these are some of the things I do to make things more comfortable and make things work better. After cleaning the barrel with ballistol and applying a small amount of silicone grease on the barrel bolt, and slide. 1) I then start with the magazine fitment. I...

Lets look at this economy gem, I may have never bought a DRS if this came out first :) https://pintydevices.com/products/pcp-pellet-gun-air-rifle-high-power-airgun-for-hunting

Don’t spend the 2000 because the upper priced air rifles are just not worth it. Get yourself a marauder or any sea air rifle .AEA they are the leader and error gun advancements. They make some beautiful air rifles. You should check them out. And get yourself a compressor with the extra cash you...

New to pcp air rifles. This is my first fill of my 9L tank using my new GX CS4. My question is how long does it take before the tank gauge starts to show pressure? Anything or secrets I need to know about this setup?

Let us know how that works out for you. Other than the adjustable pressure I'm not sure it'll be much different than the other Chinese and Spanish box store magnums. Some people have luck with them. I never did. It's how I ended up with my first Weihrauch when I couldn't hardly afford food and...

Thanks. It really is a great rifle.

FX it NOT a first time gun . Personally i would highly recommend a Marauder , a good solid performer . Talk and read a lot b4 you buy . Welcome to the Best ! A G N Stan in KY .

I started out with a break barrel and was ok at 30 yards but, then I saw a pcp for the first time and at that point I gave the break barrel to my brother in-law and bought a regulated pcp, better accuracy and longer ranges. Most 25 cal get 24 shots or more with .22...

You’ve made some great choices for your first and second air rifles. My Panthera is a very consistent long range rifle. I’m very hay with it. As for a scope, I put an Athlon Helos Gen 2 on top. Very repeatable turrets that I trust to dial up and down and always come back to zero. Kenny

Hello! I have a Matador R5 in .30cal, with a huma regulator and power plenum that i bought used. (My first PCP air rifle) I chrony’d the gun at shooting between 790-800 consistently on all shots with jsb 44.75. It is super accurate at this setting, but I want to increase power to 890-900fps...

First Texas is BIG . where are you ? quite a few air shooters in TEX and places to shot , maybe your near someone / someplace and competitions ( definition of near = a few hours drive ) rules link...

Welcome to the best A G N what pellets are you using ? I assume you have cleaned the barrel ? checked the crown ?

So, I have been leaving My rifle Connected to My tank and added air as needed. After the bottle reached My desired PSI I just left it hooked up to the Tank. It's been hooked up for about 4 days. I shot the Tank down to about 2000 psi and said, time to top the tank off again. It has turned pretty...

My first air rifle was a Marauder, about 5 years ago. My first air pistol was a Pardini k60 purchased from Don Nygord in the mid nineties. The reason I got into airguns is that I hated picking up brass from the powder burners. While on my hands and knees and my father yelling, “get the brass...

I would say to grab lunch first because I don’t think you’ll be eating much crow. I doubt that anyone is shooting consistent half inch groups at 200 yards with an air rifle. Kenny

I don't think you can handle this task even with a diagram. It's not easy to service this rifle, you need to disassemble the air cylinder,to change the О-rings and clean the filling valve. for this you need a special tool that only the manufacturer has. In addition, you will never put properly...

The m4 has been having valve or valve rod problems iirc. You probably popped the valve at the power block, id look there first. Did the gun dump all its air after the pop or did it basically lock up the valve mechanism.?

Hello all. I recently became interested in air guns back in April, after accidently coming across the sport with a parallel hobby. As luck would have it, a former colleague sent me his old air rifle to use as a learning platform. Fast forward to today, and I now have 4 air rifles (including...