Search results for query: *

  1. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    A little louder than before, but WAY quieter than the U2 ever was that's for sure.
  2. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    13gr slugs are going 965fos, 13.7gr aea are going 963 and 965, not sure about the 16gr but it should be about 75-85fps less
  3. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    Good stuff! I got my Krait l slinging 16/13gr slugs and 13.7gr aea pellets
  4. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    Yessir! You still enjoying them?
  5. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    If you want to take a deep dive, I kinda hijacked this thread from @greenbeans a while back although providing necessary information on most .177 slugs available. Can you take some pictures of the HP on the 13.43gr KO slugs? I'm thinking the ones you have are made with thinner walls than the...
  6. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    I tried this on smaller iguanas, 1ft-2ft with relative thin skin, like under 1mm. There was virtually zero deformation and they were shot maybe 1 foot away
  7. JaceSpace1369

    Head shot thread

    You would be correct!
  8. JaceSpace1369

    Head shot thread

    He should get me a decent discount lol
  9. JaceSpace1369

    Head shot thread

    Krait L 177
  10. JaceSpace1369

    Airmaks Krait Pro

    No, there are not. The Krait Pro is just the Krait with all the accessories they sell put on the gun.
  11. JaceSpace1369

    N/A What is the most accurate.177 PCP at 100yds all opinions welcome???

    I did, and this was the At44 pump version, not even the side lever version. I've used the impact m2 and m3 in 177 out to 144yds with he 13.43gr ko slugs and they will shoot fantastic but they just pin hole, so you need perfect accuracy.
  12. JaceSpace1369

    N/A help

    I was referring to the Uragan 2, I haven't tried taking the bottle off the Krait, so I couldn't tell ya.
  13. JaceSpace1369

    N/A help

    You can bypass degassing the whole gun by putting a buddy bottle and buddy valve on it when tuning, that way you can remove the bottle, and simply degas the plenum before doing the rest of the work. It saves you lots of time and air. Give all of your specifics requirements you'd be hard...
  14. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    Try, doing it with a a gallon jug of water, for filling a 5 gallon bucket, then putting some rags on the bottom. So that the slug doesn't smash into the bottom of it.
  15. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    The sixteen grain Zans are supposed to expand very well, but I have a buddy that told me that they changed the formula and that they hardly expand now.
  16. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    I agree with your sentiment, These slugs, I love using strictly for pesting, which is why I always take headshots with these on iguanas. As even when I do sell the iguanas, the head gets discarted.
  17. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    I'm with you on that!
  18. JaceSpace1369

    16.5g Varmint Knockers performance on Jackrabbit

    I want to know how you're getting these 13.43gr to expand. I've shot them as fast as 1070fps and as slow as 820fps and when testing with 1, 2 and 3 iguana carcasses, they either stop in the third and remain under the skin or go through all three and have zero expansion whatsoever. Now the VK...
  19. JaceSpace1369

    Limit on Classifieds Ads bump?

    Now that I can fully agree on.