Search results for query: *

I am out of this forum. As soon as moderator 3 bans me. Good luck to the rest of you !

Moderator3 Moderator Staff member Feedback:9 / 0 / 0 Add Feedback Today at 6:38 PM nobody1, Your post (When moderators break easily) contains Discussion of the creation, fabrication, or modification of airgun moderators: Rule #5 - The discussion of the creation, fabrication, or modification...

I am now using subscriber's Tesla Valve moderator for every airgun with a 1/2-20 adapter, at least 7-8 airguns so far, including a .22 Zelos. It is the most quiet one I tried. Ask subscriber to share the moderator print files with you via email.

Can you post the new Notos moderator files? I have your original Notos mod and it works well enough. But I need to be really quiet where I live.

If you insist on Gamo then for a little more money than the Gamo Arrow I (and many others) recommend the Gamo Urban.

I assume that you you have a chrony (since 800FPS is hard to detect otherwise :) ).. If it's 800FPS to 950FPS and back to 800FPS over 90 shots that is not a useful shot string. What actual shot string did you get?

My Kral NP03 are very accurate up to about 50-60 yards. I downtuned them (using the transfer port adjuster) to get 3-4 good magazines. If I increase the power they would probably be accurate even farther away. For longer range these are my favorites (in this order): Nova Liberty .22, Umarex...

I will soon have my Kral NP03 177 and 22 for sale. They are both in mint condition, never left the house. They are great short range carbines, but I am shooting longer range now.

Did you adjust the hammer spring? The hammer spring adjuster is usually at the the rear end of the air tube.

I assume you have the Snowpeak T-Rex bullpup. 1. Does it have a hammer spring adjuster ? 2. Does it have a 1/2-20 moderator adapter ?

Good idea of showing only the "good" part of the pressure gauge. Recently I started keeping a log of airgun tunes. Now I know which pressure to start with and how many good shots I get :)

For me, the best way to get a flatter shots string (in an unregulated PCP) was using a 3D printed buffer tuned to the airgun. The buffer (similar to BStaley) is 3D printed from TPU (flexible, rubber like material). The buffer goes between the hammer and the face of the valve. It prevents the...

The Gamo Urban and the Umarex Notos are about the same price, around $230. I recommend the Gamo Urban. My Gamo Urban is more accurate than both of my Notos, and much more powerful. Stores selling Gamo Urban https://gun.deals/search/apachesolr_search/793676076188 Stores selling Umarex Notos...

Over the past 1-2 years I bought most of my airguns and pellets from Dack's Outdoors. It usually takes 30-50 days to get my order. But their price is some of the lowest and with free or low priced (< $5) shpping.

I have the Akela 177 too, also from Airgun Revisions. I had a leak through the Foster fill probe after about a month after buying it. You have no warranty with the AR guns. AR did send me a replacement fill probe, part of a kit which contained some other useful parts. Luckily I can fix my...

From Hatsan. Ask for a poppet replacement. It should be free.

With the Ozark the main issues I had were: trigger Not adjustable. Have to replace 2 triggre springs to make it lighter noise The shroud is fake since no air gets in there. I had to add my own shroud. It does come with a 1/2-20 adapter and 1/2-20 threaded barrel. hammer spring assembly The...

So glad I did not buy an Escalade. The Niksan Ozark I bought (on your recommendation and some of the very few likely paid reviews) is acceptable after adding my regulator, total price around $400. I would not buy again if I knew what I know now. So, Niksan importers/distributors (DonnyFL, The...

Did you mean that your Notos valve stem get damaged by too much pressure?

A plenum may indeed be great but it costs $50+ for a $220 airgun.