Reply To: Has Anyone Received Their MRod Compressor

Forums Air Tanks, Pumps, Compressors, & Filters Has Anyone Received Their MRod Compressor Reply To: Has Anyone Received Their MRod Compressor

Link

ajshoots
Participant
Member

BigTinBoat

“ajshoots” A 30 minute bottle from 2700-4500psi will take around 5 minutes on my 2.4cfm compressor.
 


As an FYI  – a Compressor that is putting out 2.4CFM at 4500 psi will (or should) fill a 30 min bottle from empty in 18min and 20 seconds.

I have a Shelden that is rated as a 2.4cfm. I time all my fills and just took a stab at filling a 30 minute bottle as I don’t have and have never filled a 30 minute bottle. Was just a guess. I usually top off both my tiger shark and guppy when they are down to 2900-3200psi and top off both to 4750psi as they cool to near 4500psi. I fill both back to back and allowing 30 seconds to a minute after both are filled for the compressor to clear any moisture out of the cylinders, I end up with 10-15minutes of total run time.