Reply To: AT44 short and a regulator.

Forums PCP Airguns AT44 short and a regulator. Reply To: AT44 short and a regulator.

Link

JDShapp
Participant
Member

Well tonight I got around to doing some night shots using a couple 24 LED lights to work the chrony. First setting for the regulator was at 117 like I posted before, and the shots were from 816 to 819. Pulled the reg out and reset to 124, shots were then from 836 to 840. Another pull out and a set to what I estimated as 130 bar finally got me up past 850, which I’m happy with. I’m guessing from here I’ll need to adjust the hammer spring to do some fine tuning.

Also accuracy wise after getting a range finder and the correct measuring tool I found my 25yd groups were .32 inches ctc. So accuracy wise while shooting on the curve before the regulator I was doing good. I expect to get the same grouping and maybe a few more shots