Reply To: Cricket Power Adjuster issue

Forums PCP Airguns Cricket Power Adjuster issue Reply To: Cricket Power Adjuster issue

Link

guod123
Participant
Member

My idea might possibly out hillbilly Joe. I drilled a small hole in the brass end then I bent a  fifty thousands of an inch piece of brass. I bent about an eighth of an inch at 90 degrees and made a loop that got taped to the butt pad, and the knob. The newer model that AOA sells( all black) has a hole thru the adjustment knob from say 12 to 6 oclock,  I placed the same rod thru that, duct tape is a wonderful thing.