Reply To: Accuracy problems. What do I do?
Kyler if you get the dead head fitting which is a cheap way to check your fill tanks pressure this is how you would use the fitting. The dead head is a closed end fitting on one side and an male foster fitting on the other. You insert the male foster into the female foster hose connected to your fill tank. Then close the bleeder valve on your tank and open up the main tank valve. You will then see the existing pressure of your fill tank. Then shut off the main valve and open up the bleeder valve again to depressurize the hose. The only air you loose in checking you fill tanks pressure is that in the filler hose. Hey guys if I am wrong on this or not explaining it well chime in. I want really want to get Kyler headed in the right direction. Bill
A youtube video. A video is worth a million words?