Reply To: FX Impact probe doesn't retract all the way.

Forums PCP Airguns FX Impact probe doesn't retract all the way. Reply To: FX Impact probe doesn't retract all the way.

Link

far_shot
Participant
Member

OrdnasNS

I guess that you can cock the gun without problems and it stay cocked so fat pin that catches the hammer and trigger assembly all together are fine. What is confusing is how did the length of the cocking bar got shorter, not literally but I mean, how did the pellet probe went forward. On the cocking block there is pin that catches the linkage from cocking lever, is he ok, not bent?

When You just loose screw that holds probe from the side of the gun (like when changing caliber), can you reposition the probe forward/backward, is there a play in the hole in probe?

I have not taken it apart yet, but I'm thinking the last time I had it apart there was a sleeve on the cocking pin that was slightly bent and cracked.I'm betting  that sleeve on the pin crumbled….but has no effect on cocking because the cocking lever still brings it far enough to engage the sear on the hammer…yet will relax the probe forward a  bit  when the lever is released  and traps the magazine.
The probe depth can not be adjusted  like the older Impacts.