Reply To: Continuum information/help please

Forums PCP Airguns Continuum information/help please Reply To: Continuum information/help please

Link

Hoople
Participant
Member

Continum has the AMP regulator, same as the Dreamline. Here are the instructions for adjustment:

Externally Adjustable Regulator
The adjustable AMP regulator is installed in the dreamline. It is located
either on the bottle adapter (1) or installed within the Tube with an accessible
hole pointing downwards (2).
To adjust the regulator pressure higher, turn the regulator AMP screw counterclockwise
slowly while looking at the regulator manometer located on the right
hand side of the gun. To lower the regulator pressure, turn the regulator AMP
screw clockwise a quarter turn at a time, dry firing the rifle until the correct
pressure is achieved. Make sure your rifle is not loaded before dry firing.
NOTICE – Fire in a safe direction.
NOTICE – NEVER adjust the regulator above 160 BAR as damage to the
system may occur and will void your warranty!
NOTICE – NEVER use the gun below the set regulator pressure as damage
to the system may occur and will void your warranty!