Reply To: Fwb124 piston seal replacement

Forums Springers, Pumpers, C02, & Vintage Fwb124 piston seal replacement Reply To: Fwb124 piston seal replacement

Link

warlord
Participant
Member

Should also mention, when starting use very slight pressure on the end cap to facilitate removal of the bolt that holds the end cap in place. When replacing the bolt, it is critical that the bolt hole in the tube and the screw hole in the cap line up perfectly. It is very easy to cross thread it! You should be able to finger thread it all the way in. If it is tight and you are using a wrench on it ..it is probably cross threaded.