Reply To: RAW HMX Parts (Pics of inner Guts)

Forums PCP Airguns RAW HMX Parts (Pics of inner Guts) Reply To: RAW HMX Parts (Pics of inner Guts)

Link

Dirte
Participant
Member

blowgunXXL

Dirte, 

i recently bought a HW1000x for a friend of mine.
It’s a .30, to much for my liking … .22 is my kind of a thing, but since he doesnot own a car i went the 200 in total, yep he’s my buddy so what could i do .. say no?! hardly.
But here’s the problem.
The regulator was pulled in order to shoot with an external one.
So now i have place it back inside the airgun.
Can give me instructions how to do so?
I am technically skilled in repairing about anything from powertools to engines and have experiance withservicing springpowered airguns.
But this is my first PCP to handle.
After reading your article i thought .. lets ask Dirte for help.
i think with some pointers i’ll manage.
the o rings were recently replaced the former owner told. also he never fidled with it.
the gun looks like new.. now wear tear or scratches.
 
 
cheers,
 
BlowgunXXL

Here is a link on the THEOBEN which is basically the same. The regulator is just under the bottle and the fill/gauge assembly which slides off. Just be careful (3000 psi will kill you) about the pressure. If it has been modified I would make sure everything is free of pressure before I proceed. https://www.jimmiedeesairguns.com/guides/service-guides/theoben-rapid-mkii-service-guide/a-service-guide-for-the-theoben-rapid-mkii/