Reply To: FX Impact STX reg creep

Forums PCP Airguns FX Impact STX reg creep Reply To: FX Impact STX reg creep




Hello, here is a hint

Order is: Reg, HST, Valve … I read HST, Reg, Valve.

Did you really max your HST for the reg pressure? & did you use a 1.5 mm allen key to adjust the HST screw? (Since you did not mention that I have to ask), if you add more pressure to the reg, you should always get more speed, if you are not getting it, is because the HST is not in max and the hammer is not opening the valve fully. (and is Reg and then HST, in that order)

It might be that…(hopefully) ;) if not you might want to check this:


Thanks. When I say the HST was maximized I mean screw the HST slider (1.5mm screw) until there is no play back and forth. Then play with the reg in very small turns until I see the max speed. Thanks for the AGN post. I will read it.