Reply To: Nova Liberty reg adjustment direction

Forums PCP Airguns Nova Liberty reg adjustment direction Reply To: Nova Liberty reg adjustment direction

Link

Bluecup
Participant
Member

Ok guys,

I have the reg set back at factory position, I have shimmed the hammer spring to the max and then removed one small shim. I drilled the barrel  transfer port to 3/16 and polished , I removed the hammer spring and hammer and got all the crap grease out and polished the hammer and oiled the hammer and greased the spring. I also cleaned and smoothed out the sear a little bit. I used blue lock tight on all the screws that the assembly diagram listed. I have about fifteen different pellets to try out, now if the weather cooperates I should be set to start. One more thing does anyone know where we can get the o rings for this gun, I can find the right size but the hardness is wrong.

Thank you,

Jim