Reply To: Daystate Mark 3 trigger microswitch

Forums PCP Airguns Daystate Mark 3 trigger microswitch Reply To: Daystate Mark 3 trigger microswitch

Link

acs
Participant
Member

jims45

I have bought a non firing Mark3 and I think there is a problem with the trigger microswitch. Are these wired normally open or normally closed? The wires were soldered to the two outer pins which gives continuity until the trigger is pulled, is that correct? 

 

 

So what makes you think there is a problem with the switch..? Did you test the switch for continuity with a meter and see if it opens/closes..? Reason I ask is you used the word 'think', its a straight forward troubleshoot for a switch, it either works or doesn't. A meter would also show you exactly how the switch is wired. you could also jump out the switch to see if you could dry fire and confirm it is only the switch not working…