Reply To: Two more Wildcat questions…

Forums PCP Airguns Two more Wildcat questions… Reply To: Two more Wildcat questions…

Link

BigTinBoat
Participant
Member
Jeff,
 
Not sure (with the FAC) gun that you will be bale to get it that low without changing the TP or the plenum size. I originally set my Huma at 120 bar. After the reg broke in it settled at 130 and was shooting the 10.34's over 1000fps. I wound up turning the reg to it's lowest setting of 90bar and now it's down to 865 with the 10.34's.
It does put them all in a single hole at 25yds. I don't think the (Huma) FAC regulator is designed to go below 90bar. You would likely need his LOW pressure one. (60-110bar)