Previous

Reply To: Connecting a Daystate compressor to air tank

Forums › Air Tanks, Pumps, Compressors, & Filters › Connecting a Daystate compressor to air tank › Reply To: Connecting a Daystate compressor to air tank

July 25, 2018 at 6:10 pm Link

Regal_US
Participant
Member

The fitting on the end of the Daystate compressor is DIN. You need a DIN to male Forster adaptor, and also a microbore hose with female Forster connectors on each end, one end will plug into the rifle, and the other into to adaptor on the pump. You do NOT want a BSP disconnect because the threads are not compatible. You can get the DIN/Forster adaptor and the micro bore hose from Joe Brancato of AirTanksForSale (standard length is 40"). His gear is 1st rate (be safe when playing with 4500 PSI air). http://www.airtanksforsale.com

DIN fitting on your (actually mine) Daystate compressor

The DIN to Forster connector

The two connected