Reply To: Increasing hammer spring tension on the Crown

Forums PCP Airguns Increasing hammer spring tension on the Crown Reply To: Increasing hammer spring tension on the Crown

Link

tor47
Participant
Member

If you try to lower the hammer tension wheel from max, and down to 5-4, and so on, and hardly gets any more speed, you probably can just increase the regulator pressure some more. If you do not need to use the lower settings on hammer wheel for low velocity, you can just turn the wheel down a step or two, if the hammer strikes to hard. That allows you to finetune with reg pressure instead, without the need to take the stock off and adjust the screw every time.