Reply To: *** rapid air weapons regulators adjusting them ***

Forums General Discussion *** rapid air weapons regulators adjusting them *** Reply To: *** rapid air weapons regulators adjusting them ***

Link

Greisdor
Participant
Member

First you must remove the bottle, fill port sleeve, then regulator.  The adj 0f the reg is done in small turns of the nut and holding the Allen screw on the end.  Use very small movements. You must put reg back in to test pressure. To test – the plug on the bottom of the action is removed and a gauge installed. Replete till u get where you want it.

Having said that – you can also shorten the hammer spring and adjust the plug on the back of the action to get same results.