Reply To: A little guidance, if you please (Beeman R9 troubles)

Forums Springers, Pumpers, C02, & Vintage A little guidance, if you please (Beeman R9 troubles) Reply To: A little guidance, if you please (Beeman R9 troubles)

Link

TylerE.
Participant
Member

Thanks for your input guys. I have a V-mach 12 ft lb kit that I bought to put in a different gun that I used to have. I guess now is as good a time as any to install it. I stripped it down and have yet to see anything out of the ordinary but I do see a TON of lube everywhere. There are globs of it on all the trigger sears, the spring is very lubed and there was so much on the seal that it is any wonder why all the shots weren’t dieseling. It took a whole paper towel just to clean off the seal. It would take a long time to burn off all that through normal shooting. I guess they must get paid by the tub of grease there at the factory! I hope to deburr it and get it back together soon. Thanks again, I’ll check the trigger block a little more when I get back to it.