Reply To: Replacing Hatsan fill probe O-rings for 1st time. TOOLs, parts, instructions?

Forums PCP Airguns Replacing Hatsan fill probe O-rings for 1st time. TOOLs, parts, instructions? Reply To: Replacing Hatsan fill probe O-rings for 1st time. TOOLs, parts, instructions?

Link

Stefanjan
Participant
Member

Replaced my orings once.  Actually tried a set of cheap nytril rings and they work great.  I have refilled a dozen times with no leak.  One important thing is to be sure to bleed off ALL air before removing the probe.  I kept pulling the probe out to quickly when I first started to use my compressor (i would bleed the air off but leave the compressor running).  Thiscost me my first set of orings after just 2 fills.  I use silicon dive grease on the orings.  Just enough to coat them.  Do be careful of that sharp edge in there.  I took mine down right away with a little emery paper.  Had that edge in both of my tanks, but one was a lot worse than the other.  I also store my probe in a heavy duty ziplock bag.  Dont want to risk and debris getting in there.