Reply To: FX CROWN .25 AND DONNYFL SHOGUN!!!

Forums PCP Airguns FX CROWN .25 AND DONNYFL SHOGUN!!! Reply To: FX CROWN .25 AND DONNYFL SHOGUN!!!

Link

NoLandBeyond
Participant
Member

The barrel on the Crown is held in place by two screws near the breech block. If you apply a little pressure to the shroud, the POI will shift, since the barrel itself is a floating barrel but is directly in contact with the shroud.

I had bought the Tatsu to stick on the end of the shroud since it was the smallest/lightest moderator that Donny makes, but it still shifted the POI down. Reason I bought it was that there was info on the forum that the rifle is a bit more accurate with the shroud in vs shroud out at longer ranges, likely due to harmonics related to a longer dangling barrel/shroud.

I could not tell a difference in accuracy with shroud in vs out in the 50 yard distances I shoot at so I just opted to leave the moderator off and just use the shroud extended when needing it quiet.
Do test it out yourself and see what happens.