Reply To: Shooting low
Bruce,you haven’t elaborated much.Have you run out of elevation adjustment. That’s a good quality combination of gun and scope to be so off the mark. What rings are you using?
Some rings have a grub screw in the base to stop them moving on dovetail mounts(especially common on springers).If unnoticed,and it is a turn or two down when you mount the rings on the gun the front and rear rings won’t be aligned horizontally.Acts like zero limit or no limit rings depending on which ring is held higher when tightened down.
Did it once. Took some clever minds to figure it out. Cheers Paul.