Reply To: FX Crown/Impact regulator mod tutorial
Thanks for taking the time to do this tutorial, I have the same set of Mitutoyo calipers and digital 0-1” mics
in a case. I have lamanite Crown and have noticed a slight creep but so far really not that severe. However, I will do the mod to to eliminate any creep. I called FX and spoke to Earnst Rowe, he sent me all the O rings that the regulator uses and a couple belville washers along with 5 probe or breech O rings.
He said working on your own FX Airgun will in no way void the warranty and actually encouraged it.
I am a tool and Die maker by trade so I have access to a full machine shop, I have my own Bridgeport mill and Harding lathe that I use quite often.