Reply To: Easiest Guns/Brands to Work on?
If you want the absolute easiest to service PCP, I would have to say it would be the Edgun Leshiy. Simply depressurize the air tube with the incorporated bleed valve and unscrew the tube. Then you will have access to any orings that might need replacing and access to the regulator if you want to adjust it. If you want to clean the barrel, simply cock the gun and the breech is wide open. Want to clean the air baffle in the moderator, simply unscrew the end-cap and remove the baffle. Changing a barrel to another caliber or indexing a barrel is less than a 1 minute task. Adjusting the hammer spring tension takes just seconds. What a great, solid design.
After buying my Leshiy I became a big Edgun fan. My new R5 should be here today.