Reply To: Umarex Gauntlet 22: Status update performance report
Forums › PCP Airguns › Umarex Gauntlet 22: Status update performance report › Reply To: Umarex Gauntlet 22: Status update performance report
Thank you for watching my stuff and I hope there was some value in what you watched. As for your question about a spring plunger to replace the spring. If you go to the McMaster Carr catalog online you could research the availability of a unit to directly replace the adjustment screw. I am not sure if there is one as I have never tried this. I too have knife sharpening and belt sander equipment which do a far better job of smoothing things out. One of the things that I try to capture in my videos is the everyday guy and how he can achieve the desired results. I also try to demonstrate the method rather than referring to it. An example would be to polish the trigger to a mirror using my belt sanders and then describe to the viewer that they can achieve the same thing with polishing by hand.
If you noticed when I suggest a method, I execute it live, no retakes, risky yes, but its real and all the folks have that same level of risk, LOL
So i would recommend you browse through the catalog found here, for ideas.