Reply To: Eagle Vision Camera Mount on Non-Threaded Eyepiece?
Forums › Cameras, Videos, & Recording Equipment › Eagle Vision Camera Mount on Non-Threaded Eyepiece? › Reply To: Eagle Vision Camera Mount on Non-Threaded Eyepiece?
I tried the big tube and screws on my Primary Arms branded 4-14X40 FFP and it was next to impossible to get it aligned anywhere close to being something usable. If you slide the big tube on my scope and hold it in place with one set of screws so there’s enough sticking out beyond the eyepiece to slide the inner tube that is attached to the camera, it will not hold straight enough to support the camera without tightening the screws so tight they’d dig into the rubber coating of the eyepiece. Tried sliding it up far enough so that both sets of screws would tighten onto the eyepiece, then there was not enough of it sticking out beyond the eyepiece to slide the inner tube into it… I tried desperately to make it work to no avail. I’m going to do some more research and try to figure out something because I really want to mount my camera to the gun that has this scope on it. Right now, my only option is the Seben/Orion and that thing is just too much trouble too… If I figure out something, I’ll post up.