Reply To: Crosman 1377 LOVE…

Forums Springers, Pumpers, C02, & Vintage Crosman 1377 LOVE… Reply To: Crosman 1377 LOVE…

Link

ahobie17
Participant
Member

I got the sear kit and installed it. Here’s my comments for it. With the hammer kit in the gun the sear didn’t reliably hold the hammer back. Plus the sear is light weight i.e. soft aluminum. It should be steel as this is a wear item. When the sear did hold the hammer back the trigger was very light. It will probably work just fine with the factory hammer but not so with the one I have. So it was removed and the washers were still use to take up slack in the trigger.

In regards to cocking noise, I never let the handle contact the pump tube when pumping. I use my thumb against the trigger guard to limit the travel of the pump handle.