Reply To: New Huma Regulator Issues

Forums PCP Airguns New Huma Regulator Issues Reply To: New Huma Regulator Issues

Link

strikefast
Participant
Member

Under water? Where was the air escaping? i just installed a Huma in a Challenger and it did not direct to remove the valve o ring. Also the Huma does not vent through a required hole in the air tube like the Robert lanes. I installed several Lanes without any failures. I tried the Huma, to avoid drilling the vent hole. The Huma requires you to have the vent holes in the reg to be facing up. Also when you first go to fill the gun you must COCK IT FIRST before filling. This is to remove the pressure on the valve. I did not do this for the first 2 tries as there was no instructions to cock it I reasoned it out myself as the air was escaping rapidly out the muzzle, indicating the valve was leaking the air. Hope this helps….