Reply To: Canadian Diana 75 Kit is here !!

Forums Springers, Pumpers, C02, & Vintage Canadian Diana 75 Kit is here !! Reply To: Canadian Diana 75 Kit is here !!

Link

Wadcutter
Participant
Member

Here is my setup. It worked perfect on a D60 and 75. All the parts you will need are shown in this .pdf  The clamp in your video is the wrong type.
https://drive.google.com/file/d/0B5Nu6UixbtYRS0tJcFZweG43c0k/view?usp=sharing

That small diameter rod through the rear piston and the spring set is the key. You can literally get the rear piston in with one hand. I kid you not.

Photos of my D75 using clamp and rod combo.
RWS 75HV Spring and rear piston installation 01_18_17-564

The smaller blue clamp is to keep the main clamp from slipping off. You could probably use a wire tie also.
RWS 75HV Spring and rear piston installation 01_18_17-567

RWS 75HV Spring and rear piston installation 01_18_17-566

Your big headache will be the trigger assembly.