Reply To: Cricket Bullpup Modification Ideas

Forums PCP Airguns Cricket Bullpup Modification Ideas Reply To: Cricket Bullpup Modification Ideas

Link

zebra
Participant
Member

“Erik”You file the cocking Plate in a way so when the gun is cocked and the cocking lever out you can lock in Place the Magazine pin. Not much to it and not that useful but also nothing that gets in the way.

 


If you don’t want to do a permanent mod on the gun, or don’t 100% trust your ability to not ruin it, this mod also works well if cut a new breach  cover from aluminum plate or carbon fiber panels. You just cut around an outline of the old one with a dremel and then finish the edges with a metal file and sand paper. 

Even if if you plan to use the original, I suggest tracing the outlin onto some cf or aluminum plate first, just in case you need a back-up…