Reply To: FX Impact 25 and H&N Barracudas
Sharroff, the valve on yours is way off when compared to mine.
Mine is shooting 890fps, 130bar reg pressure, Power 3 as well but Valve is opened to just past 2nd line. You have the valve opened past 4th line!!
Something is definitely not setup right. I suspect either the hammer seat (adj knob side) is not fully threaded on to the valve stem OR the valve stem is not fully threaded in the valve seat (magazine side).
Are you able to fully close the valve (with 2nd line fully covered)? Can you measure the gap between knob and receiver end of the valve cover when fully closed?